Hey everyone!
Up for sale is a Scientech 365 with a 38-0101 Calorimeter (tripod not included) that I thought I would post here before heading over to feebay.
I've had it since 2014 but have only used it maybe twice since then (I have a 20C-A-1-Y too) because it is too big for my current space to put anywhere in which it is easy to access. Although I would love to keep it over the Ophir because it looks nicer (in my opinion), I need money for other hobby expenses.
And here is the other information with pictures:
The meter zeroed out on the 20W setting. I have never tried the Joules setting with a laser pointed at it because I honestly never saw a need to. I have also never tuned it because the output was close enough to the Ophir head that I didn't see it as that important.
The first one is me struggling to keep the laser steady, so it fluctuated a bit.
The second one I managed to hold it steady enough to get a steady reading.
There is some delay in these things for those who don't know, the response time is like a second or two though so nothing to worry about. I am using an NDB7875 diode in a Cypreus XL host (shout out to sinner) for this test.
The front and back of the meter. It looks really new and there are no marks on it that caught my eye (I would show you if there were).
The calorimeter, which probably has had some use based on the bit of wear on the Scientech logo on the side of it in the initial picture.
Lastly, the inside. I was going to clean it before taking the pictures but honestly do not know what is safe to use so opted out of that.
Thanks for looking, any other questions feel free to ask :beer:
Up for sale is a Scientech 365 with a 38-0101 Calorimeter (tripod not included) that I thought I would post here before heading over to feebay.
I've had it since 2014 but have only used it maybe twice since then (I have a 20C-A-1-Y too) because it is too big for my current space to put anywhere in which it is easy to access. Although I would love to keep it over the Ophir because it looks nicer (in my opinion), I need money for other hobby expenses.
And here is the other information with pictures:
The meter zeroed out on the 20W setting. I have never tried the Joules setting with a laser pointed at it because I honestly never saw a need to. I have also never tuned it because the output was close enough to the Ophir head that I didn't see it as that important.
The first one is me struggling to keep the laser steady, so it fluctuated a bit.
The second one I managed to hold it steady enough to get a steady reading.
There is some delay in these things for those who don't know, the response time is like a second or two though so nothing to worry about. I am using an NDB7875 diode in a Cypreus XL host (shout out to sinner) for this test.
The front and back of the meter. It looks really new and there are no marks on it that caught my eye (I would show you if there were).
The calorimeter, which probably has had some use based on the bit of wear on the Scientech logo on the side of it in the initial picture.
Lastly, the inside. I was going to clean it before taking the pictures but honestly do not know what is safe to use so opted out of that.
Thanks for looking, any other questions feel free to ask :beer:
Last edited:
