Podo
0
- Joined
- Nov 7, 2013
- Messages
- 717
- Points
- 63
Another new 4W+ NDB7A75 laser with G7 mounted inside, I'll throw in a G2 lens if you want one.
Video:
LPM test Video (as you noticed, the power reduced after 60s because the protection kicks in:
The water proof 27cm x 24.5mm host is made from nickel-copper alloy (cost around $60 actually) for lowest thermal resistance to absorb and transfer the enormous heat from the copper heatsink and 7A75 diode to the whole body to achieve unlimited running time and stability that one cannot expect in such powerful laser.
The ACC 6A driver itself is developed specifically for high power blue laser with 5 modes: Safety Mode <30mw, half power <4W, Strobe, Full Power and SOS mode. Half press to switch modes.
Laser / Diode / battery Protections:
There's an electronic lock to prevent unauthorized use for multi modes driver. When starts, half press three times within three seconds and it will lock as safety mode(1~10mw), to unlock just half press five time within three seconds. For the diode, the laser will switch to half power if the total running time is over 2 minutes at full power, you can simply half press the tail button then it will back to full power. Driver will lowering down the current if the temperature is too high because of long operating. Reverse Polarity Protection is build in too.
[/SIZE]
The laser takes 2x18650 and the operating current is 4.2A with 3.2A drains from batteries.
Come with a G2 lens and mounted with G7 lens:
As usual - Beam shots:
Asking price: $320 with the new G7/G2, shipping is excluded.
Any questions would be welcomed!
__________________
Video:
LPM test Video (as you noticed, the power reduced after 60s because the protection kicks in:
The water proof 27cm x 24.5mm host is made from nickel-copper alloy (cost around $60 actually) for lowest thermal resistance to absorb and transfer the enormous heat from the copper heatsink and 7A75 diode to the whole body to achieve unlimited running time and stability that one cannot expect in such powerful laser.
The ACC 6A driver itself is developed specifically for high power blue laser with 5 modes: Safety Mode <30mw, half power <4W, Strobe, Full Power and SOS mode. Half press to switch modes.
Laser / Diode / battery Protections:
There's an electronic lock to prevent unauthorized use for multi modes driver. When starts, half press three times within three seconds and it will lock as safety mode(1~10mw), to unlock just half press five time within three seconds. For the diode, the laser will switch to half power if the total running time is over 2 minutes at full power, you can simply half press the tail button then it will back to full power. Driver will lowering down the current if the temperature is too high because of long operating. Reverse Polarity Protection is build in too.
[/SIZE]
The laser takes 2x18650 and the operating current is 4.2A with 3.2A drains from batteries.
Come with a G2 lens and mounted with G7 lens:
As usual - Beam shots:
Asking price: $320 with the new G7/G2, shipping is excluded.
Any questions would be welcomed!
__________________
Last edited:
