So who's selling drivers now

[Kookapeli]

DTR and Astralist seem to be quiet I'm looking for a linear driver for a 660nm mitzi output 350mw

 

[jnrpop]

If your only after a linear driver, Try Odicforce in the UK, but dont bother with thier boost drivers they are all constant Voltage and not constant current. edit: Odicforce are a re-seller of the chinese drivers/modules/diodes

 

[Kookapeli]

They're all too big, need a smaller size

 

[paul1598419]

Survival Lasers has a continuous positive linear driver called the Blitz Linear Driver. It is tiny, but you would need to use it with a case positive diode, or isolate your module from the driver. They may have a continuous negative linear driver too. IDK.

 

[Kookapeli]

Will check them out

 

[trinh hong phuoc]

You also can find x-wossee( Vladimir)
He has a mini driver,low current for all diode(it is buck boost driver)
https://www.m.ebay.com/sch/i.html?sid=x-wossee&isRefine=true&_pgn=1
Link eBay

 

[Shotgundrums]

You also can find x-wossee( Vladimir)
He has a mini driver,low current for all diode(it is buck boost driver)
https://www.m.ebay.com/sch/i.html?sid=x-wossee&isRefine=true&_pgn=1
Link eBay

How about those drivers of yours you showed us Plan on selling those?
SGD

 

[paul1598419]

Those drivers from X-Wossee are SEPIC topology. I like the drivers, but the shipping from Russia is almost as high as priority shipping here. Does he combine shipping if you buy several drivers or do you have to pay a shipping charge for everyone of them.

 

[Shotgundrums]

Those drivers from X-Wossee are SEPIC topology. I like the drivers, but the shipping from Russia is almost as high as priority shipping here. Does he combine shipping if you buy several drivers or do you have to pay a shipping charge for everyone of them.

Hey, Paul.
Yeah, I bought a couple of those 500mA SEPIC drivers from him a while back. Shipping was around 6 or 8 dollars, I believe.
I have yet to use these drivers, though.
SGD

 

[paul1598419]

Hey, Paul.
Yeah, I bought a couple of those 500mA SEPIC drivers from him a while back. Shipping was around 6 or 8 dollars, I believe.
I have yet to use these drivers, though.
SGD

Did you have to pay a shipping charge for each driver you ordered, or did he combine ship them to you in one package? The shipping charge for me is $6.00, but if I buy several I don't think it is right to charge shipping on all of them as they can easily be shipped in one parcel.

 

[Shotgundrums]

Did you have to pay a shipping charge for each driver you ordered, or did he combine ship them to you in one package? The shipping charge for me is $6.00, but if I buy several I don't think it is right to charge shipping on all of them as they can easily be shipped in one parcel.

Na. It was a flat rate and both shipped together. Buy one or twelve...it’ll be that 6 dollars
SGD

 

[paul1598419]

Thanks. That i s good to know.

 

[Z80 Lasers]

I stock most of the X-Wossee drivers.

 

[Kookapeli]

I stock most of the X-Wossee drivers.

How much, Inc shipping ?

 

[Z80 Lasers]

How much, Inc shipping ?

Which driver do you need? I have the BB3, BB6, ACS5500 and BB8. I also have the Astralist SuperDrive V and a few others.

 

[RDTech]

Vladimir is a very honest, talented engineer. The drivers he sells work flawlessly when directions are followed. Those who require analog 0-5V linear control / modulation need look no further. I have purchased a number of his drivers and NEVER had any issues. (Other than MY X-Wife's innate ability to Mess things up in a business. Sorry for the off-topic, His drivers are solid.