Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

Plug N' Play DDL drivers RUN 2!!

amkdeath

amkdeath

0
Joined
Oct 28, 2007
Messages
2,631
Points
48
All right, here is run 2!

boardyn1.jpg


The shipping/misc-fees charge has been lowered by $2!

http://amk123.110mb.com/boards.htm

GB boards:

$2.53 each (with soldermask, no components)

Assembly Option (NOTE I AM ONLY ASSEMBLING 10 UNITS!! FIRST COME FIRST SERVE!)
$3.00 per board

Potentiometer (either separate, or on ASSEMBLED board)
$1.00

DOMESTIC SHIPPING / PAYPAL FEES / MISC. FEES:

$4.00


INTERNATIONAL SHIPPING / PAYPAL FEES / MISC. FEES:

$9.00


MINIMUM ORDER: 50
 





Erm pardon my ignorance but when is Run1 shipping out?? And do we get the new reduced shipping price if you haven't shipped yet ;) Darn should have been in run 2 instead.

Ah i just checked. shipped today it seems.
 
xarylx said:
Erm pardon my ignorance but when is Run1 shipping out?? And do we get the new reduced shipping price if you haven't shipped yet ;) Darn should have been in run 2 instead.

Ah i just checked. shipped today it seems.
Click to expand...


yup. the price was changed by my local shipping center, it seems the rates are different. run 1 stays the same, there were MANY extra fees that went into making that one.

run 1 was shipped.

I marked the international packages as gift, and $5 each ;D ;D

hopefully you will all get them without trouble.
 
Question: If i give you a PCB design, are you able to get it printed along with these ones?

On another note i may be interested, just gotta see how well i can work with the ones i bought off you first.
 
SargeMX5 said:
Question: If i give you a PCB design, are you able to get it printed along with these ones?

On another note i may be interested, just gotta see how well i can work with the ones i bought off you first.
Click to expand...


PM me about your PCB's.


I am working with knimrod to work out a few kinks here and there, and run 2 should be awesome.

The manufacturer said they assemble boards too for an extra charge, and they can do SMD too! no guarantees, but I am thinking of doing a GB for prebuilt SMD driver boards!
 
no more interest for run 2?

I thought there would be more interest after run 1 was a success... I myself need a few more of these too....
 
Umm you know I'm really curious why people aren't going to the smaller lm317 package?  Like for example the SOT-233 is a SMT and would work for reds in my barrels.
 

Attachments

  • 296-SOT-223-3.jpg
    296-SOT-223-3.jpg
    209.4 KB · Views: 856
Kenom said:
Umm you know I'm really curious why people aren't going to the smaller lm317 package? Like for example the SOT-233 is a SMT and would work for reds in my barrels.
Click to expand...

i have kenom, i use the lm317mdt in the to-252 package. I have a bunch of ones that fit in the module
 
i think the lack of interest is due to the drivers made by rckstr and drlava.
 
I have looked into the SOT-223 packages, but the problem is that they can only do a ma of 500mA

so running things like opencans at 420 will generate a LOT of heat.

also, They are smaller, and if I do start a GB, many people will be unable to solder them themselves, therefore only the fraction of LPF who is willing to solder small components might join in on the GB.

I did find a company who manufactures PCB's and assembles them for you at an additional cost, and I was thinking about a SMT Driver GB. I might have to nullify this one due to lack of interest and move on.

regards,

amk
 
You must log in or register to reply here.


Back
Top