Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

My first build ever and want/need to go big! just a few questions

M

megathumpstar

0
Joined
Mar 1, 2012
Messages
2
Points
0
So this is my first build and before you say search around...I have and with so many options my head is spinning. First, this is what I have determined for parts.
5.6mm 445nm 1w laser diode (not sure if this is blue ray tho) 5.6mm 445nm ~1W laser diode [M0020] - $51.99 : Modwerx Shop

micro boost drive Micro BoostDrive DC/DC Converter Portable Laser Driver [M0003] - $25.99 : Modwerx Shop

module w/ AR coated lens Laser module w/ heatsink and AR coated glass lens (405-450nm) [M0019] - $12.99 : Modwerx Shop

Second, Will the micro boost drive be a good match for the diode? Would I have to change anything?

What is a good battery for this set up?

Any help is much appreciated!
 





megathumpstar said:
So this is my first build and before you say search around...I have and with so many options my head is spinning. First, this is what I have determined for parts.
5.6mm 445nm 1w laser diode (not sure if this is blue ray tho) 5.6mm 445nm ~1W laser diode [M0020] - $51.99 : Modwerx Shop

micro boost drive Micro BoostDrive DC/DC Converter Portable Laser Driver [M0003] - $25.99 : Modwerx Shop

module w/ AR coated lens Laser module w/ heatsink and AR coated glass lens (405-450nm) [M0019] - $12.99 : Modwerx Shop

Second, Will the micro boost drive be a good match for the diode? Would I have to change anything?

What is a good battery for this set up?

Any help is much appreciated!
Click to expand...

Don't forget your required Laser Safety Goggles/Glasses
for that High Powered Laser....


Jerry
 
havent decided on a host, handheld, prefer cheap and nothin fancy. any suggestions on them? also another question, I know it doesnt burn white objects without a black mark on it, but has anyone tried cutting transparent fishing line?
 
how about a C6 Aurora C6 DIY Cree LED Flashlight Shell/Casing Complete Set(1*18650 Battery) free shipping at priceangels.com also sale on falishlight,buy cheap flashlight,brightest flashlight,LED flashlight,rechargeable flashlight,laser pointer, green laser pointer
and the heatsink Aurora C6 Heat Sink - $10.00 : Mohgasm!, Because it feels so good.
but you cant use that modual you'll have to use an axiz with either a 3 or 1 element lens
1 element= more power but higher price
3 element= less power but significantly cheaper
 
Last edited:
Save yourself some hassle, get a FlexDrive with current pre-set and wires soldered and mounted with a G-2 Lens
1.3W 445nm Blue Laser Module
W/Microboost & 405-G-2 Glass Lens
$130
PM DTR he is the man..
And for the host, its the best way to go.. Moh's C6 are great.

Or There is another *super saver option what i call it*
If money is an issue, PM mohrenberg for a JAD(just add diode kit) he sells them on LPF for $30 with Driver, 3-element Glass Lens AR Coated and Heatsink..
http://mohgasm.com/JAD.html
http://laserpointerforums.com/f39/presale-just-add-diode-kits-70799.html

All u need is a Diode which u can either get it from Modwerx $52 or DTR $45
http://laserpointerforums.com/f64/dtrs-laser-shop-1-5w-2w-m140-diodes-45-shipped-us-61635.html
5.6mm 445nm ~1W laser diode [M0020] - $51.99 : Modwerx Shop

EDIT: Dude where are your safety goggles?
Just in case you think why everyone brags about it to the noobs...
http://laserpointerforums.com/f53/hit-eye-1000mw-445nm-blue-laser-69469-2.html

Nobody would sell you anything if u havent got the proper eyewear..
Here are nice safety goggles that u can get:
http://www.survivallaser.com/Eagle_...0nm_Laser_Safety_Goggles/p556088_4768519.aspx
 
Last edited:
Yea Dtr does have that but a Buck driver would be better for a 445 and 2 bats
 
Linear bleads excess voltage as heat while bucks turn that into current the extra current or bat life is worth the extra $$ imo
 
mattco2 said:
Linear bleads excess voltage as heat while bucks turn that into current the extra current or bat life is worth the extra $$ imo
Click to expand...

Micro BoostDrive DC/DC Converter Portable Laser Driver [M0003] - $25.99 : Modwerx Shop
^^Am i missing something?

FlexDrive is a buck/boost driver ~5.5V
Whereas;
Microboost is BOOST ONLY!

And then we have Linear Drivers.. You need some READING.. !!
And btw what's wrong with using a Single Cell with High Efficiency driver instead of a linear driver.. And as for buck driver, you didnt answered what driver u are referring to. Please be specific when you post.
 
The flex drive has a Max input of 5.8 volts the x-drive has a Max input of 13 volts and the c6 host accepts 2x 16340s. Boost type drivers generally(not always) have lower efficiencies than buck drivers
 
Last edited:
megathumpstar said:
So this is my first build and before you say search around...I have and with so many options my head is spinning. First, this is what I have determined for parts.
5.6mm 445nm 1w laser diode (not sure if this is blue ray tho) 5.6mm 445nm ~1W laser diode [M0020] - $51.99 : Modwerx Shop

micro boost drive Micro BoostDrive DC/DC Converter Portable Laser Driver [M0003] - $25.99 : Modwerx Shop

module w/ AR coated lens Laser module w/ heatsink and AR coated glass lens (405-450nm) [M0019] - $12.99 : Modwerx Shop

Second, Will the micro boost drive be a good match for the diode? Would I have to change anything?

What is a good battery for this set up?

Any help is much appreciated!
Click to expand...

The only thing i have to ask is did you figure out how to put the diode in there aswell the lens? This module has a screw in diode thing idk its cool but the other module takes more "work" forsay you have to press the diode in this one you drop the diode in and screw the copper ring ontop. RIGHT?
 
U wanna go big do ya well then I recommend a saik sa-305 2 Ben boosts a 445nm h1600 diode one of jays felong 32650's a copper aixiz modual and a g2 lens
 
^^that isnt big , its huge !! Definitely 2.2~2.5W with that setup!!
 
You must log in or register to reply here.


Back
Top