My 850mW 445nm

[rangedunits]

I finally receaved it yesterday.


Lasers Specs

Diode: A130
Drivers; Micro Boost
Lens used: 405-G-1
Jayrob Aurora Kit.


Edit: now have Ez Focus Adapter that i can take out on the go.
Peak is now 966mW
The lasers got broken because my ez focus adapter made the heatsink twist and wires did a short in there.




Camera Specs

Camera: Kodak Z740
Lens: 6.3 mm
(Max aperture f/2.8)
Exposure: Auto exposure, Program AE, 1/8 sec, f/2.8, ISO 140
Focus: Normal

I can"t take beamshot, as its too powerful to use inside. :na:

 

[Eudaimonium]

What a great looking... I've never seen such an awsome KEYBOARD!!

JK :na:

As soon as you get some nightime there, make sure to take some beamshots, compare it to that evo pro and that other laser!

 

[adam]

hi range how much did this cost and were from i was gonna order the artic but i have no idea whats going on with it would i be bale to build my own 445nm 800mw + for under $200?

 

[Kevlar]

Nice, congratulations!!!

Personally, I like the bottle of Purell, nothing like good hygiene!!

 

[Tech_Junkie]

Looks nice Range. Go outside and take some beam shots. Mine is still in transit from Italy. HIMNL9 made me a custom driver. Its a 140 diode, and driver is set to 1.4 Amps. It should be a burner. :eg:

 

[rangedunits]

hi range how much did this cost and were from i was gonna order the artic but i have no idea whats going on with it would i be bale to build my own 445nm 800mw + for under $200?

+-200



PS, i am not sure who exactly build it, but it work great.

 

[nikokapo]

Looks nice Range. Go outside and take some beam shots. Mine is still in transit from Italy. HIMNL9 made me a custom driver. Its a 140 diode, and driver is set to 1.4 Amps. It should be a burner. :eg:

Nice! I want to see how that goes, what battery will you be using?

 

[scopeguy20]

Aurora uses an 18650 battery, a sweet kit from jayrob. -Glenn

 

[rangedunits]

Aurora uses an 18650 battery, a sweet kit from jayrob. -Glenn

I was reading a lot about that host and thought it was the same size as my p7. seem i was wrong.

There is a comparison between my MTE Ssc-p7 and this aurora in photo 3.

 

[Wallydraigle]

The Aurora is 4.75 inches by 1 inch. That's 12cm by about 2.5cm.

 

[boscoj]

I'm just about done with a cheap prototype host and have alot of R/C stuff laying around so I didn't need batteries, soldering irons etc . . .

diode $40 hakzaw
flexdrive $23 drlava
module & lense $10 drlava
corrent lens $11 hakzaw
Arctic Alumina $7 newegg
donate $25 LPF
-------------------
Total -tax & shipping = $116


everything else was just lying around . . .

hi range how much did this cost and were from i was gonna order the artic but i have no idea whats going on with it would i be bale to build my own 445nm 800mw + for under $200?

 

[rangedunits]

:bumpit:5 Pictures has been added to first post.

Thats directed to the member who say that i dont even have any lasers.

 

[BuildAbluraylaser]

Finished mine on Yesterday too.

 

[DTR]

I was reading a lot about that host and thought it was the same size as my p7. seem i was wrong.

There is a comparison between my MTE Ssc-p7 and this aurora in photo 3.

Here is my P7 vs 18650 host

 

[Hemlock_Mike]

Screw this cute stuff -- I need confirming data on high end power for these 445 diodes. Heatsink, current, PO and temp.
Anyone here doing science?
I killed a 445 reading a momentary 1.5 WATTS.

HMike

 

[Seoul_lasers]

I have both an A103 and an A104 running at 1875mA now for 4 days in a maxsink!