Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

LightSpace---5W RGB

L

lasershowlily

0
Joined
Jun 8, 2011
Messages
141
Points
0
5W RGB is in stage for rehearsal.
R637~1W,G532~2W,B445~2W
20120311121639dtquw.jpg

20120311122307msdpu.jpg

201203111225410youh.jpg


Best regards,
Lily
 





But can it pop a balloon? :)

I almost had to put my sunnies on for those pics - that projector is seriously bright :)
 
vk2fro said:
But can it pop a balloon? :)

I almost had to put my sunnies on for those pics - that projector is seriously bright :)
Click to expand...
"Can it pop a balloon?"Is your mean like this?
.JPG


Only if the Red diode is good enough,the laser beam can be pure white!I love it!
 
lasershowlily:

usually one of us when we see a nice powerful laser system with make the statement "But will it pop a balloon", "But can it light a match", "Will it cut electrical tape".

There's normally no need for an answer, and is just a joke, or you can answer with a crazy answer like "yes it pops 20 balloons in a row instantly". Untill power meters were available such as Jerry's Laser Bee and Kenoms Kenometer, or the Radiant Alpha, people without a pro power meter guaged their lasers by how fast it would burst a balloon or light a match.

Personally I think a power meter ends up cheaper in the long run, and no bits of burst rubber or smouldering match to pick up! :)

Thats a similar setup to what I'm building - 1.5W of green, 1.5W 445 and 1W 637. I'm just too lazy to change my signature :)
 
Last edited:
vk2fro said:
lasershowlily:

usually one of us when we see a nice powerful laser system with make the statement "But will it pop a balloon", "But can it light a match", "Will it cut electrical tape".

There's normally no need for an answer, and is just a joke, or you can answer with a crazy answer like "yes it pops 20 balloons in a row instantly". Untill power meters were available such as Jerry's Laser Bee and Kenoms Kenometer, or the Radiant Alpha, people without a pro power meter guaged their lasers by how fast it would burst a balloon or light a match.

Personally I think a power meter ends up cheaper in the long run, and no bits of burst rubber or smouldering match to pick up! :)

Thats a similar setup to what I'm building - 1.5W of green, 1.5W 445 and 1W 637. I'm just too lazy to change my signature :)
Click to expand...

LOL,thank you for telling me about this.You know,english is my second language.So sometimes,I don`t know you guys joking:yabbem:

Your own bulid:1.5W of green, 1.5W 445 and 1W 637,do you think the 1W 637 is too strong for the RGB?Is your 637 KVANT`s?

Lily
 
I figured the green would overpower the red. I havent ordered my lasers yet but have settled on these powers for price and space concerns. The red laser is not a K-Vant. I dont have that much money - its going to be a LaserWave..

Whats in yours?
 
Last edited:
vk2fro said:
I figured the green would overpower the red. I havent ordered my lasers yet but have settled on these powers for price and space concerns. The red laser is not a K-Vant. I dont have that much money - its going to be a LaserWave..

Whats in yours?
Click to expand...

In my 5W RGB,it`s 637~1W,532~2W,B445~2W.
Last year,i sold a 3W RGB(637~1W,G532~1W,B445~1W) to my customer.But you know,the Red is too strong,it makes the color balance not good.Finally,he saw that the white beam is not pure,it becomes pink.So I sent him a new stronger Green laser diode.Now,his RGB has the pure white again.

Lily
 
ok - you asked me what brand laser i had in mine - I was wondering what was in yours :P
 
Wow I hate you now - those K-Vants are nice lasers. (kidding about the hate you part!)

I am putting 1.5W CNI, 1W 637 LaserWave, and have yet to decide on the blue laser.

I will be buying the red laser first where as most people start with the green. - its $1500. I'll then get the green ($850) and finally the blue. I still need a pass red reflect blue/green dichro, some 3 axis mounts, some mirrors and an AR window from edmunds, a saftey board and ilda gem from stanwax in the uk, and a pangolin quickshow (that will come last as I already have a frame streamer I can play with). I'll get the quickshow from hakzaw1 on these forums.

as for my red being too strong, I'd rather have too much than not enough. You can always turn down a colour in software, but you cant turn them up (unless you fiddle with the pots, and I'm not doing that to a $1.5K laser.)

I already have DT40W's, 2 x 3 axis mounts, a pass green reflect blue dichro (that works with 445 nm), a projector case, a baseplate and some power supplies.
 
Last edited:
vk2fro said:
Wow I hate you now - those K-Vants are nice lasers. (kidding about the hate you part!)

I am putting 1.5W CNI, 1W 637 LaserWave, and have yet to decide on the blue laser.

I will be buying the red laser first where as most people start with the green. - its $1500. I'll then get the green ($850) and finally the blue. I still need a pass red reflect blue/green dichro, some 3 axis mounts, some mirrors and an AR window from edmunds, a saftey board and ilda gem from stanwax in the uk, and a pangolin quickshow (that will come last as I already have a frame streamer I can play with). I'll get the quickshow from hakzaw1 on these forums.

as for my red being too strong, I'd rather have too much than not enough. You can always turn down a colour in software, but you cant turn them up (unless you fiddle with the pots, and I'm not doing that to a $1.5K laser.)

I already have DT40W's, 2 x 3 axis mounts, a pass green reflect blue dichro (that works with 445 nm), a projector case, a baseplate and some power supplies.
Click to expand...

Just becasue my 637 is Kvant`s,so you hate me:yabbem::thinking:

Anyway,since you have made the good preparation for your own RGB,hope your everything go well!

If you want any help,it`s available to contact me;)

Lily
 
lasershowlily said:
Just becasue my 637 is Kvant`s,so you hate me:yabbem::thinking:

Anyway,since you have made the good preparation for your own RGB,hope your everything go well!

If you want any help,it`s available to contact me;)

Lily
Click to expand...

The hate part is a joke. He is saying he is jealous of your Kvant's.
 
You must log in or register to reply here.


Back
Top