Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

is this a good deal?

borgqueenx

borgqueenx

0
Joined
Jun 30, 2008
Messages
1,660
Points
48
I can get this for 670 dollar with DHL shipping included:
25Kpps galvo's.
1W RGB (really red green and blue(445nm))
ILDA
DMX
Sound activation mode.
in this host:
114.jpg


for 570 dollar i can buy a projector with same specs but it has a RGV with 500mw's.

tell me:)
 





if thats from china you may want to do some reading as those are not 25k galvos but more along the lines of 10-15k.
 
kiyoukan said:
if thats from china you may want to do some reading as those are not 25k galvos but more along the lines of 10-15k.
Click to expand...

well i spoke to them on MSN, and asked if they were sure about the 25k galvo's. they said yes...
unless they lie...
 
^Sometimes the Chinese exaggerate, but that is a very good price for just about any full-color scanner.. I would have to assume that it is TTL only (TTL limits the total number of possible colors to 7), but in the future you could upgrade the drivers on the blue and red modules to flexmods and get a small analog green to match and have an analog system for minimal expense.
 
ElektroFreak said:
^Sometimes the Chinese exaggerate, but that is a very good price for just about any full-color scanner.. I would have to assume that it is TTL only (TTL limits the total number of possible colors to 7), but in the future you could upgrade the drivers on the blue and red modules to flexmods and get a small analog green to match and have an analog system for minimal expense.
Click to expand...

if the galvo's are crap of the animations are flickering, can i upgrade them easlily when buying a 30k set?
or is it hard to do.
 
Well, I haven't seen the interior of those specific projectors, but typically changing out parts is pretty simple and straightforward, especially things like galvo blocks that tend to be universally similar if not the same.
 
ElektroFreak said:
Well, I haven't seen the interior of those specific projectors, but typically changing out parts is pretty simple and straightforward, especially things like galvo blocks that tend to be universally similar if not the same.
Click to expand...

do you know a tutorial or something? soldering required, how's the chance to fuck something up?

I do have a RC helicopter and i managed to screw everything loose, upgrade one part and screw everything back together.
 
also if it is chinese, you might want to ask them if they can give you some power readings...picture or movie that is.
like stated above chinese exeggerate often about their product, usually the power is exeggerated to.

just to know that the modules are good and it really is 1W total
 
Yeah rick i dont trust them 100% and i asked for it.
It was 1w guaranteed and likely ogerspec and they would give me a video.
But a video wont say much as well....they can use a fogger.
But at least it will show animations and effects so i know what im into:)
 
also see what each individual mw for each laser is. notice how much power drops out if you opt for RGV LoL.

michael.
 
off topic: when I enter this page Google Chrome says "Malware Detected" in a full red warning screen.
it says that the page "http://laserpointerforums.com/f47/good-deal-58066.html" may be infected (LOL) because it contains elements of "http://en.pf-lighting.com/" as a known malware hoster webpage.

anyone had this issue too?
 
532 with Envy said:
I just got the same warning....haven't gotten it here before
Click to expand...

yes and if you check the malware block website you see the website pf-lighting offered "bad infection software" 90 days ago. (and i checked 30 days ago)
and i have heard more people ordering from them so i wouldnt say they cant be trusted.
 
You must log in or register to reply here.


Back
Top