Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Help me with my laser






Hi how about first presenting your self in the welcome section and tell us a little about your self. And you can add your location on the planet.
Folks will help you better without barging through the front door
Rich:)
 
Lifetime17 said:
Hi how about first presenting your self in the welcome section and tell us a little about your self. And you can add your location on the planet.
Folks will help you better without barging through the front door
Rich:)
Click to expand...
This ^^^^^^^^^^^^^^^^;)
RobyLaser, have no clue what your 2nd post means but make sure the knob is actually turning the lens..Unless we are being trolled? it looks like you stuffed cotton in there??
 
Last edited by a moderator:
Lifetime17 said:
Hi how about first presenting your self in the welcome section and tell us a little about your self. And you can add your location on the planet.
Folks will help you better without barging through the front door
Rich:)
Click to expand...
What he said ^^^

RobyLaser said:
Yea i tried.Look how it looks with out the lens
Click to expand...

What do you expect without a lens?

Which/what laser is it, from where?

Return it for replacement or refund--get a better quality laser.
 
Last edited:
Lol,ok.The knob is turning the lens.i ve tried everything.Agter a charge it looked like this.
 
You said it just came today? Take the battery's out FIRST and then look inside the lens area to see if any packing material got in. The lenses on these 301. 303's, don't usually come off easy and most of the time it's just the focus knob only and not the lens that unscrews. Need more info or some more pic's and like Encap said return it for another maby before destroying it..
 
Guyz,idk how to say this,but i think i touched the lens with a match.And now it looks like this.I tried to clean the lens but nothing.Imma sendbit back tommorrow
 
These low power 532nm DPSS lasers have acrylic lenses. That means plastic. Unlike the glass lenses you find in higher power lasers these acrylic lenses will melt if heated. If you were trying to light a match and the flame or match got onto the lens, it is a lost cause now. Buy another one. They are ~$5.00 on eBay.
 
Last edited:
Hi welcome to lpf, this is normal on the 301 laser's 1/3 have the issue,its not really an issue its just the lens,
its nothing you can do the only way to fix it its to replace the lens its not worth it :)
 
Last edited:
Can you link me a lens changing tutorial?:)
I think imma change the lens,because I payed 15 bucks for it,and imma pay another 2 bucks for a better lens.I think it is gonna worth it
 
I have many of this front lenses if you need 1 i can send you a complete set ware you located !
 
Last edited:
You must log in or register to reply here.


Back
Top