WackBag
0
- Joined
- Aug 26, 2008
- Messages
- 387
- Points
- 18
SOLD...FS: LaserGlow Aquarius-10 473nm Blue Laser Pointer
SOLD>>>For Sale is a LaserGlow Aquarius-10 Blue 473nm Laser Pointer. With a fresh CR2 rechargeable 3 volt battery it peaks at 15mW's and pretty much stays there. With a Rayovac lithium battery (non-rechargeable) it peaked at around 14 mW's then settles to around 12 mW's or so. I'm no expert but it has a sharp blue color with a TEM-00 transverse mode and a beam divergence of < 1 mm. Details on this laser can be found here: Laserglow - Aquarius Blue Laser Pointer
This laser retails for close to $1000.00 but I will sell it for $400.00 and will include the aluminum case, 2 CR2 batteries (1 lithium rayovac, 1 lithium rechargeable), and free shipping in the US. Email me for a quote on international shipping. I have used the laser very little, definitely less then 3 hours. The laser has one small (less than 1 mm) area on it where the blue paint has rubbed off and the brass is showing through. It is really hard to see. Please PM me if you have any questions. Paypal is preferred and I will ship USPS priority in the US within 24 hours after payment.
Picture of the Case
Picture of the laser in case
Laser outside the Case
Laser shown against my wall
Beam shot in office
Measured using my LaserBee I
SOLD>>>For Sale is a LaserGlow Aquarius-10 Blue 473nm Laser Pointer. With a fresh CR2 rechargeable 3 volt battery it peaks at 15mW's and pretty much stays there. With a Rayovac lithium battery (non-rechargeable) it peaked at around 14 mW's then settles to around 12 mW's or so. I'm no expert but it has a sharp blue color with a TEM-00 transverse mode and a beam divergence of < 1 mm. Details on this laser can be found here: Laserglow - Aquarius Blue Laser Pointer
This laser retails for close to $1000.00 but I will sell it for $400.00 and will include the aluminum case, 2 CR2 batteries (1 lithium rayovac, 1 lithium rechargeable), and free shipping in the US. Email me for a quote on international shipping. I have used the laser very little, definitely less then 3 hours. The laser has one small (less than 1 mm) area on it where the blue paint has rubbed off and the brass is showing through. It is really hard to see. Please PM me if you have any questions. Paypal is preferred and I will ship USPS priority in the US within 24 hours after payment.
Picture of the Case

Picture of the laser in case


Laser outside the Case

Laser shown against my wall

Beam shot in office

Measured using my LaserBee I

Last edited: