- Joined
- Dec 4, 2011
- Messages
- 60
- Points
- 0
I've bought, as specified:
OpticPro - Full Angle Protection Laser Safety Goggles for 532nm/445nm Laser, 1 piece
Sanyo UR18650F 2600mAh 18650 Li-ion Battery, 1 piece
I've ordered them on February 5th and the shipping started on February 14th. I've got the postal notice on February 22nd and got the package on the 23rd. I must say, that's incredibly fast. Six working days of shipment from Hong Kong to Croatia, and all in all 17 days of waiting. Well done. :bowdown:
Now for the contents.
The package came in a yellow bubblewrap envelope containing a quite nice black goggle case with a handy clip. Inside there were goggles wrapped in a plastic bag, cleaning cloth and the battery wrapped in paper and little bubblewrap bag.
The battery.
I thought "Sanyo" is going to be written, as well as "UR18650F 2600mAh", but as you see, this is not the case.
Batteries are not my area of expertise, so I did a websearch and found out that Panasonic actually bought most of Sanyo's shares so this should be the battery from link here. It seems pretty fine as I can tell from the PDF. If someone thinks something's wrong here, please tell me.
Pros: The battery looks decent, though I can't test it properly at the moment.
Cons: None. Looks fine.
The goggles.
Pros: Decent goggles that turn everything into horror scenes from movie Shutter. Very entertaining.
They attenuate my 50mW pen laser pretty well, as seen on this photos.
They let some of the light out, and as Lazerer states on their page, they should never be used to look directly at the beam.
Also, wearing them, it's impossible to see the beam in air.
Cons: Every protective goggles of this kind has fine scratches, but this one had a major scratch that looks as if someone was using a screwdriver to erase something.
The goggles could've been better without it, but the scratch is not positioned near the axis of vision and does not bother me while wearing them at all.
I'd say they might be too expensive for what you get, but overall, they're not bad.
To sum it all up, a bit too expensive on the goggles, but I won't complain. The staff is kind and even offered help with future orders that I'm planning to make at Lazerer.com
When I buy my first high powered laser, I'll buy the power certificate they offer, and then make report about the laser at LPF. No way I'm buying a laser without a report. I've already made that mistake with Dealextreme.
OpticPro - Full Angle Protection Laser Safety Goggles for 532nm/445nm Laser, 1 piece
Sanyo UR18650F 2600mAh 18650 Li-ion Battery, 1 piece
I've ordered them on February 5th and the shipping started on February 14th. I've got the postal notice on February 22nd and got the package on the 23rd. I must say, that's incredibly fast. Six working days of shipment from Hong Kong to Croatia, and all in all 17 days of waiting. Well done. :bowdown:
Now for the contents.
The package came in a yellow bubblewrap envelope containing a quite nice black goggle case with a handy clip. Inside there were goggles wrapped in a plastic bag, cleaning cloth and the battery wrapped in paper and little bubblewrap bag.

The battery.

I thought "Sanyo" is going to be written, as well as "UR18650F 2600mAh", but as you see, this is not the case.
Batteries are not my area of expertise, so I did a websearch and found out that Panasonic actually bought most of Sanyo's shares so this should be the battery from link here. It seems pretty fine as I can tell from the PDF. If someone thinks something's wrong here, please tell me.
Pros: The battery looks decent, though I can't test it properly at the moment.
Cons: None. Looks fine.
The goggles.

Pros: Decent goggles that turn everything into horror scenes from movie Shutter. Very entertaining.

They attenuate my 50mW pen laser pretty well, as seen on this photos.

They let some of the light out, and as Lazerer states on their page, they should never be used to look directly at the beam.
Also, wearing them, it's impossible to see the beam in air.
Cons: Every protective goggles of this kind has fine scratches, but this one had a major scratch that looks as if someone was using a screwdriver to erase something.

The goggles could've been better without it, but the scratch is not positioned near the axis of vision and does not bother me while wearing them at all.
I'd say they might be too expensive for what you get, but overall, they're not bad.
To sum it all up, a bit too expensive on the goggles, but I won't complain. The staff is kind and even offered help with future orders that I'm planning to make at Lazerer.com
When I buy my first high powered laser, I'll buy the power certificate they offer, and then make report about the laser at LPF. No way I'm buying a laser without a report. I've already made that mistake with Dealextreme.
