- Joined
- Nov 14, 2013
- Messages
- 2
- Points
- 1
Having received my 2.4+w 445nm from Blord (Belgium to US in 4 days), I quickly decided I needed a Beam Trap. Its more fun to make one than buy one, so here I go!
Pict. 1) 10 Razor Blades, painted with Black High Heat BBQ Spray. Aluminum cutouts will be inserted between the blades due to the blade design having a hole smack dab in the middle of the blade.
Pict. 2) A 1 1/2 x 3/4 inch Copper Reducer, inside painted w/ same High Heat Spray.
Pict. 3 & 4) A 1 1/2 End Cap, painted inside, 10 razor blades fitted in perfectly in a row. It's so dark in there you can't even see the 10 blades even in a lit room with the camera flash on.
Pict. 5) Completed product. No glue, solder or anything else needed, everything fits together.
Thoughts? Concerns? Feedback welcome!
Pict. 1) 10 Razor Blades, painted with Black High Heat BBQ Spray. Aluminum cutouts will be inserted between the blades due to the blade design having a hole smack dab in the middle of the blade.
Pict. 2) A 1 1/2 x 3/4 inch Copper Reducer, inside painted w/ same High Heat Spray.
Pict. 3 & 4) A 1 1/2 End Cap, painted inside, 10 razor blades fitted in perfectly in a row. It's so dark in there you can't even see the 10 blades even in a lit room with the camera flash on.
Pict. 5) Completed product. No glue, solder or anything else needed, everything fits together.
Thoughts? Concerns? Feedback welcome!
