Battery contact board

[pados1002_Alex_13]

Hey guys, i m about to make my own host and i m looking for a blank battery contact board like the one that survivallaser selĺs. I was about to buy from them but when i saw the shipping for Greece i almost had a heart attack... It was about 45usd shipping for 2 boards and 2 driver pills... Any idea if i can find similar products with fewer shipping costs?

 

[Z80 Lasers]

What size do you need? I have 17mm, 20mm and 29mm boards. I can ship from USA to Greece for around $5 for standard shipping.

 

[pados1002_Alex_13]

I m thinking 2 x 17mm and 2 x 20mm @Shmackitup... Send me the approximate cost for these! Thanks for the reply btw!

 

[FAP]

I misunderstood the last post that the size was 2mm x 20 mm, when he meant two each of those sizes, just realized that after emailing Zack asking for a quote for five of the "2 x 20 mm" battery contact boards, he's going to be confused with that, so thought I'd better mention my error here. I just need five 20 mm OD round battery contact boards.

 

[nmbusa]

I got a bunch of these ages ago +blanks 17mm


have size 18-30 OD copper shims and just solder blank to what ever diameter pill I need

 

[FAP]

I have shims but no contact boards, except a few I purchased which are already populated with parts made for flashlight LED's I could pull the components off of, but would rather use a clean PCB.

 

[nmbusa]

I have shims but no contact boards, except a few I purchased which are already populated with parts made for flashlight LED's I could pull the components off of, but would rather use a clean PCB.

if populated boards are not to be used I prefer dessoldering useless parts and always drill a hole in the middle for +wire and spring bypass both springs also to minimize spring resistance we do at BLF, for high power builds

 

[FAP]

My same idea too, but I don't have nice springs like that, where to find them?

 

[nmbusa]

My same idea too, but I don't have nice springs like that, where to find them?

fasttech kaidomain mainly as I mod flashlights also

 

[Deleted member 57455]

Hey guys, i m about to make my own host and i m looking for a blank battery contact board like the one that survivallaser selĺs. I was about to buy from them but when i saw the shipping for Greece i almost had a heart attack... It was about 45usd shipping for 2 boards and 2 driver pills... Any idea if i can find similar products with fewer shipping costs?

just wait for a few, will be receiving the pack soon, price is 50c per 17mm board, Blame orbit couriers stopping the pack at customs!

 

[pados1002_Alex_13]

Ok Gianni! Business with you is great so far!

 

[Deleted member 57455]

this is how they look.

 

[pados1002_Alex_13]

Guys one more question. I have this laser... A cheap green AliExpress one... Any idea if this tailcap can handle 1.5A or max 1.7A? How can i figure that out? I ll make a host of my own and i d like to use this tailcap switch...