Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

250mW 650nm RED Laser Lab Projector OEM with TTL

H

Hiram

0
Joined
Sep 19, 2007
Messages
10
Points
0
Just ordered, should be here in about a week. New to LASERS so be gentle. Can someone tell me how to use the TTL on this laser I just orderd? Any info is welcome... Thanks :)
 





Re: 250mW 650nm RED Laser Lab Projector OEM with T

for a start, you might want to post this in the appropriate board, and secondly welcome to the forum ;)
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Where did you buy it from? TTL is usually 0V and 5V, one being on, the other off. Unless you know the exact laser though, you can't tell which is which, if its really 5V, or the input configuration is since its not standardized. That may be somethign to ask the company you bought it from.
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

pseudonomen137 said:
Where did you buy it from? TTL is usually 0V and 5V, one being on, the other off. Unless you know the exact laser though, you can't tell which is which, if its really 5V, or the input configuration is since its not standardized. That may be somethign to ask the company you bought it from.
Click to expand...
I bought it on e-Bay from ZoneStealth.
 Wavelength : 650nm RED
 Output power (mW) @ 25C : 250mW
 Operating Current (mA) : 330ma
 Operating Voltage : 3.0 - 5.0V DC
 Operation Mode : CW
 Modulation Mode: Analog or TTL > 10khz
 Beam Divergence > 0.4 mrad
 Output Power Stability < 1.0%
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

things said:
for a start, you might want to post this in the appropriate board, and secondly welcome to the forum ;)
Click to expand...
Thank You for the Welcome. Sorry I posted this wrong, hopefully I will figure this all out...  Thanks
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

I bought one of those. The 100mw version the focus is really bad on them :(
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Shame you didn't ask first....always ask before buying anything laser related. I hope it lives up to its specs.
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Gazoo said:
Shame you didn't ask first....always ask before buying anything laser related. I hope it lives up to its specs.
Click to expand...
I also bought a 30mw green laser on e-Bay from Glocks12, it should be here in a day or two. I hope. Sorry I didn't find this forum sooner. I hope they work out.
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Yeah...I hope so too :) Please let us know when you get your stuff and what you think of it. And please be careful...I hope you are considering goggles especially for the 250mw. laser.
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Hiram - SERIOUSLY consider sending the red unit to someone to test out - the last 250mw unit I tested from "zonestealth" was barely putting out 110mw......he rips people off daily, and sits back, smiling :(

Greg
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Gazoo said:
Yeah...I hope so too :) Please let us know when you get your stuff and what you think of it. And please be careful...I hope you are considering goggles especially for the 250mw. laser.
Click to expand...
Thanks, What type of goggles would be the best for this laser? 8-)
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

SenKat said:
Hiram - SERIOUSLY consider sending the red unit to someone to test out - the last 250mw unit I tested from "zonestealth" was barely putting out 110mw......he rips people off daily, and sits back, smiling :(

Greg
Click to expand...
Tkanks for the heads up. I wish before diving into this hobby head first, I would have tested the water first. Sounds like there are a lot of sharks out there. How does one go about testing the output? I read somewhere you could put a red LED in front of the laser diode and use a amp meter across the LED to measure current??? :-/
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Hiram said:
[quote author=Gazoo link=1190255822/0#8 date=1190354108]Yeah...I hope so too :) Please let us know when you get your stuff and what you think of it. And please be careful...I hope you are considering goggles especially for the 250mw. laser.
Click to expand...
Thanks, What type of goggles would be the best for this laser? 8-)[/quote]

I recommend Wicked Laser Lasershades. I have two, one for blocking red and the other for green. But personally I would not buy a laser from them. The shades will run you about $60.00 including the shipping. The link for the red shades follows:

http://www.wickedlasers.com/lasers/Red_650nm_LaserShades-49-11.html

These red shades are perfect. Some of the others block out so much you can't even see the dot. With these you will be very happy.
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Hiram said:
Tkanks for the heads up. I wish before diving into this hobby head first, I would have tested the water first. Sounds like there are a lot of sharks out there. How does one go about testing the output? I read somewhere you could put a red LED in front of the laser diode and use a amp meter across the LED to measure current??? :-/
Click to expand...

That method will not give you any kind of accurate measurement. You need a laser power meter which will measure the output of the laser in mw's. They are a bit pricey. So if you want to get it measured, send it to SenKat. He is a good guy.. :)
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Thanks for all the info guy's....
 
Re: 250mW 650nm RED Laser Lab Projector OEM with T

Just received my 250mw red laser, applyed 4.83 vdc the current draw at the batteries is 330ma, (1.5939 watts power comsumption) but it will not lite a match. I tried to adjust the pot, the current will drop down to 240ma but 330ma is the upper limit. Is this the best I can expect?  :-/
 
You must log in or register to reply here.


Back
Top