Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Recent content by Kenneth_v

  1. K

    Here's my first try at a DIY red

    With this battery I did all my testing on the breadboard, the pre assembly testing of circuit board etc, I've popped about 50 baloons, lit about 50 matches and the battery is still measuring 7.3V. If it keeps holding a charge like this, I might not ever need to charge the battery!!!
  2. K

    Here's my first try at a DIY red

    I am using a triton electronic charger for my radio control stuff, it is designed for LiPo, lithium ion, lead acid, NiMh, NiCad and has a heat sensor as well. I just made a lead that will attatch to the charger and has the male connector to fit the battery connector
  3. K

    Here's my first try at a DIY red

    Get them hooked on lasers early they can spend$$$ for the rest of thei life!!
  4. K

    AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok

    Re: AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok No prob, I was having a crappy day and just took it that way :-/ Have a good weekend and enjoy the bright lights!!!
  5. K

    Here's my first try at a DIY red

    I think this is the pot. http://info.tactnet.co.jp/cgi-bin/copal/eprodisp.cgi?pg=0&pk=img&pf=010TRE&pm=TRE001&pn=20
  6. K

    my new diodes take a look

    Reminds me of the sasquatch photos!!!! Just kidding!!
  7. K

    Here's my first try at a DIY red

    Yes, it is a senkat diode. I ground down the things with a dremel, as well as cut the holes. I kept it down to around 180mA because of the bad press lately on the last batch of diodes, but gave the pot a slight turn this morning!!! I ordered the pot through a local electronics supplier, it is...
  8. K

    Here's my first try at a DIY red

    I figured I'd do a box one for my first try. It works great, burns matches instantly at about 5 feet. I decided to go with a 7.2v lithium camcorder battery.
  9. K

    AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok

    Re: AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok I've got it tuned down to about 180mW might jack it up in a while and push the envelope, it's only a diode!!!
  10. K

    AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok

    Re: AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok You are a wise man Gazoo Thanks for all the help you have given people through your many posts. I have learned alot in the short time I have been here, thanks to helpful people like you. I got my box laser running tonight. It is fantastic, burns...
  11. K

    AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok

    Re: AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok Thanks Rog, I still have to set things up tonight so I will test the voltage with the diode in both positions and see if there is a dif between the two
  12. K

    AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok

    Re: AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok sorry to offend you. With all the new threads to read, im sure I was responsible for wasting 4 seconds of your time. If it is really an issue for you, I appologize and maybe should have posted it under my previous post. A few kind members were...
  13. K

    Can someone explain the diode in the DDL circuit?

    Re: Can someone explain the diode in the DDL circu
  14. K

    AAAAAAHHHHHHH  !!!!!!!   Thanks Desslok

    Thanks for asking the diode question. I was having a problem the other night with voltage being higher than I liked, the ddl on 7.2v lithium thread. I couldnt adjust things to get below 3.14-3.17v without dropping my mV to the 50's. I just had the light go on!!!!! I think that I have my 1N4001...
  15. K

    Can someone explain the diode in the DDL circuit?

    Re: Can someone explain the diode in the DDL circu I think I remember reading that it was to provide a 0.7v drop in voltage to the LD. Correct me if it I am remembering wrong. Ken
See more


Back
Top