Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

New York Skating Lessons | Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FS: New Aurora C6 Copper 445nm SOLD

davidbarrick

davidbarrick

0
Joined
Mar 21, 2010
Messages
87
Points
0
Up for sale are copper Aurora C6 445nm >1W lasers. I just built these over the weekend. Each one has less than 2 minutes of runtime. I will include 2 CR123 batteries and an Aixiz glass lens. Price is $110 shipped. I also have 2 pairs of goggles for an extra $15 each. I will be able to ship on Tuesday. I'm still waiting on lenses from Stonetek...

U.S. ONLY PLEASE

I have 4 3 2 1 0 left.

SOLD PENDING PAYMENTS

IMG_6396.jpg


IMG_6391.jpg


laserBeam.jpg
 
Last edited:





Re: >1W New Aurora C6 Copper 445nm $110 shipped!

Dang those hosts seem alot sexier than mine as I remember it....

BTW, this is a STEAL, depending on outputs and what not.. I'm assuming there the universal buck drivers like most of these are at 1.2A?
 
Last edited:
Re: >1W New Aurora C6 Copper 445nm $110 shipped!

jakeGT said:
Dang those hosts seem alot sexier than mine as I remember it....

BTW, this is a STEAL, depending on outputs and what not.. I'm assuming there the universal buck drivers like most of these are at 1.2A?
Click to expand...

Yes sir! Buck driver putting out an average of 1.18 amps
 
Re: >1W New Aurora C6 Copper 445nm $110 shipped!

Wow these are Great lasers at an amazing price. They will definitely be gone in a flash.
Don't those "Cree" brand hosts costs more than the brandless ones most people buy as well?

David... :D I still got 5 of these direct diode CNC machined copper sinks if you want to make more when your done with these four. :crackup:
 
Last edited:
Re: >1W New Aurora C6 Copper 445nm $110 shipped!

Mohrenberg said:
Wow these are Great lasers at an amazing price. They will definitely be gone in a flash.
Don't those "Cree" brand hosts costs more than the brandless ones most people buy as well?

David... :D I still got 5 of these direct diode CNC machined copper sinks if you want to make more when your done with these four. :crackup:
Click to expand...

Haha Moh I might have to try some of you direct press sinks soon.
 
Last edited:
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

They aren't even mine. They were from Pontiacg5. They are CNC machined. It's the same sinks Yobresal used in his copper builds.
 
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

Machro said:
are you using this driver ?

$1.99 - 18V 5W Cree Circuit Board for Flashlights (16.8mm*5.5mm) - Flashlight Parts and Tools
Click to expand...

You know what I've never understood about that driver?
- It's a buck driver, but it also (sort of) boosts as well. Unless I'm having a brain lapse here, I'm fairly certain you can at least get a 445 to lase with a single cell and that driver.

Anyway, back on topic - I seem to remember someone commenting that this isn't quite the driver that SL uses in their Aurora builds. Regardless, it's a decent driver for 445s, and this price is absolutely phenomenal. I'm going to suggest that it's maybe the best price I've seen on a 445 build yet. ($15 host + $5 module + $10 lens + $45 diode + $3 driver + $7 batteries + $20 heatsink + $5 for wire/solder/thermal-grease/electricity to solder with) -> You're basically at $110 in just costs.

There's some wiggle room in a few of those costs I quoted, but seriously, you're really selling these at near break-even, and a loss if you consider your time worth even $5 an hour.

Amazing deal.
 
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

Payment sent for laser and goggles!! Thanks
 
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

Machro said:
are you using this driver ?

$1.99 - 18V 5W Cree Circuit Board for Flashlights (16.8mm*5.5mm) - Flashlight Parts and Tools
Click to expand...

Yes

rhd said:
You know what I've never understood about that driver?
- It's a buck driver, but it also (sort of) boosts as well. Unless I'm having a brain lapse here, I'm fairly certain you can at least get a 445 to lase with a single cell and that driver.

Anyway, back on topic - I seem to remember someone commenting that this isn't quite the driver that SL uses in their Aurora builds. Regardless, it's a decent driver for 445s, and this price is absolutely phenomenal. I'm going to suggest that it's maybe the best price I've seen on a 445 build yet. ($15 host + $5 module + $10 lens + $45 diode + $3 driver + $7 batteries + $20 heatsink + $5 for wire/solder/thermal-grease/electricity to solder with) -> You're basically at $110 in just costs.

There's some wiggle room in a few of those costs I quoted, but seriously, you're really selling these at near break-even, and a loss if you consider your time worth even $5 an hour.

Amazing deal.
Click to expand...

I haven't tried this driver out with one cell... the input voltage on the specs sheet says 3V-18V so I assume this would be possible?

Yea I dont really prefer to make a big profit off of these builds... they're way to easy :shhh:
I just like to have the build experience!
 
Last edited:
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

If you had one in polished silver, I would be all over it.
I didn't notice if they were only 1 mode or 3. :undecided:
 
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

Still. A really good price. The last one surely won't take long to sell. :cool:
 
Re: FS: New Aurora C6 Copper 445nm $110 shipped!

pleas ship to israel and i will buy
 
You must log in or register to reply here.


Back
Top