Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Going for $100 unless better offer comes in!

KRNAZNBOY

KRNAZNBOY

0
Joined
Mar 29, 2013
Messages
1,221
Points
63
Hey guys up for sale is two 445nm

First one is my Laser/Charger i just built
It has two USB ports out the back where you can charge your devices, as well as a battery level indicator so you know when your batteries are low.

Build Thread Here: http://laserpointerforums.com/f65/d...-usb-charger-laser-wooop-pic-heavy-89432.html

It uses the classic M140 diode at 1.5 amps :) with a o-like G2 lens

Host is a Jinheng 12A flashlight from Fasttech :)

I HAVE NOT metered it, but i can garuntee you AT LEAST 1.5 watts based on the M140's efficiency curve. If not, i will refund your money or do a partial refund if you want to keep the laser.

PICS:
5_zpsdcdf5260.jpg

12_zps2aa675a4.jpg

WP_20140604_017_zps446de5b6.jpg

WP_20140604_019_zpse56b3afc.jpg

WP_20140604_018_zps11f149c1.jpg

16_zps20becdd1.jpg

15_zpsf26d1d6a.jpg

17_zps0ffff2aa.jpg


MORE PICS IN THE BUILD THREAD

ASKING PRICE: $130 shipped in the US
 
Last edited:





Re: FS: 445 Clearance 2-in-1 Big Boy! :)

Good luck on the sale:beer: Hopefully someone finds what they're looking for here
:bumpit:
 
Last edited:
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

Why does the second one say "comes as is"? Something wrong with it?
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

crazyspaz said:
Why does the second one say "comes as is"? Something wrong with it?
Click to expand...

Kind of. Its working fine except that the tail cap is broken and the duty cycle is very short.

:beer:
-Matt
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

What is the xboost set at? I am thinking about buying this and using a different diode in it..
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

RayJay said:
What is the xboost set at? I am thinking about buying this and using a different diode in it..
Click to expand...


The x-boost is set at about 1.5 amps and it is adjustable down to no higher and down to around 500ma? It is set to range two and i don't know what that is, What current do you want to set it to?
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

No 100% sure yet. I have a few diodes that I could throw in it but the leading contender is a 500mW mits that I would run at about 1 Amp.. maybe a touch less maybe a touch more.
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

matt if i were you i would get mr.crouse to build a set screw heatsink to go around the 1X10440 sinner host. What happened to the switch? did it melt or just fail?
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

RayJay said:
No 100% sure yet. I have a few diodes that I could throw in it but the leading contender is a 500mW mits that I would run at about 1 Amp.. maybe a touch less maybe a touch more.
Click to expand...

Then the driver will work for you as is :)

bdgreenb said:
matt if i were you i would get mr.crouse to build a set screw heatsink to go around the 1X10440 sinner host. What happened to the switch? did it melt or just fail?
Click to expand...

The tailcap failed because too much current was passing through it. It is not as simple as replacing the switch unless there is a switch the same size that can handle more current.

:beer:
-Matt
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

kraz I know you will sell them I have faith
 
Re: FS: 445 Clearance 2-in-1 Big Boy! :)

:bumpit:

Guys this stuff needs to go!!!!!
 
You must log in or register to reply here.


Back
Top