Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

"CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (REFUNDING.!!!!!!)

Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Yay! Thanks Lazeerer. Hope there's a few left over.
 





Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

lazeerer said:
They will be here this week Weds - Friday.;)

Once I fill all Paid Orders I will know exactly how many i have left over.:)
Click to expand...

Is this for round 1, 2 or both?
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Ooh Ooh Oohhh - it's Friday, did the diodes arrive?
I've hosts and drivers at the REaDy :)
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

heres to everyone without a driver yet, i got bored yesterday & made a super tiny linear driver if anyone wants to use.

heres the .brd files download Lineardriver download its smaller then a flex drive :eg:

heres what you need to make it
2x of these

1x of these

1x of these

and 1x either LM317 or LM1117, your choice but the LM1117 is better
the LM317

the LM1117

also its fully adjustable & I've ordered parts & PCB's for ~25 so ill see how they go :beer:
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

It's actually almost the exact same size as the Flex :P The Flex is 9mm x 12mm.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Wolfman29 said:
It's actually almost the exact same size as the Flex :P The Flex is 9mm x 12mm.
Click to expand...

lol i know :P just this one is like 11.8mm x 8.8mm :crackup: its pretty small for a linear
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Hey Guys,


So just want to give everyone and Update.

SO I got the Diodes in and there is a Little Bummer.


Got the Diodes in:
1705515f.jpg


I have all the Packaging ready to package them all up and ship all diodes out to everyone Monday even GB 2 since they shipped both orders together:
9381c833.jpg



But, they sent me the wrong diodes.:yabbmad: Supper Bummer.:cryyy:


So we all are going to have to be a little more patient for the replacements to come in.

I already contact the supplier and they are looking where the mix up was. It is For sure not on my end as i checked all my papers and its the correct diode I ordered. I do know there is 2 different 3.8mm diodes they offered so we got "BY MISTAKE" The Wrong ones.


Again thanks for everyones Patient.

Sorry for the bummer guys. I wish i could slap the one that packaged up our diode upside the head right about now.:scowl:
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Thanks for the update. You are not to blame for the mistake.
What are the diodes on the table ? Maybe they are interesting. :)
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Blord said:
Thanks for the update. You are not to blame for the mistake.
What are the diodes on the table ? Maybe they are interesting. :)
Click to expand...

Thank You for Understand. Dealing with Oversea "China" is a little frustrating. But more important thank you for understanding. Most of everyone has been around long enough to know GB tend to always have a Hick up in it...

I just hate to keep you guys waiting.:(

I only tested 2 but looked at all of them to make sure Iam not seeing things and they are diffrent but the 2 i tested LED around 650mA and Put out ~380mW with a 650-G1 lens.

Also THe LINES that come off the side are Nearly GONE.
 
Last edited:
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

lazeerer said:
Thank You for Understand. Dealing with Oversea "China" is a little frustrating. But more important thank you for understanding. Most of everyone has been around long enough to know GB tend to always have a Hick up in it...

I just hate to keep you guys waiting.:(

I only tested 2 but looked at all of them to make sure Iam not seeing things and they are diffrent but the 2 i tested LED around 650mA and Put out ~380mW with a 650-G1 lens.
Click to expand...

It's no problem :) I'm sure everyone understands.

Do you have to return these? Or are they yours
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

It looks like they are the LPC-826 diodes.
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

AnthoT said:
It's no problem :) I'm sure everyone understands.

Do you have to return these? Or are they yours
Click to expand...

Thank You.

I will have to return these. These are Cheaper diode and Not on the Limited stock list like the other ones. So I can always get these in the future. They are cheaper then your LPC-826 diodes and appear to be on pair with them.


Blord said:
It looks like they are the LPC-826 diodes.
Click to expand...


Yes. I think they are on Pair in power. These are also Dual WL.

The ones we order are not.

Or are you saying that they are as in they really are.?:

These are 3.8mm:
7162c546.jpg
 
Last edited:
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

lazeerer said:
Thank You.

I will have to return these. These are Cheaper diode and Not on the Limited stock list like the other ones. So I can always get these in the future. They are cheaper then your LPC-826 diodes and appear to be on pair with them.





Yes. I think they are on Pair in power. These are also Dual WL.

The ones we order are not.
Click to expand...

Interesting...

Ok thanks :)
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Glad you were smart enough to test a couple before sending them all off... :gj:
 
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

jayrob said:
Glad you were smart enough to test a couple before sending them all off... :gj:
Click to expand...

Thank You for understanding Jay.
 
You must log in or register to reply here.


Back
Top