JLasers - NUBM49

[loreadarkshade]

Another diode test for y'all! Haven't seen many posts about this diode so decided to test one for myself

This one is nothing too special in terms of power, peaking at just under 7W with TEC cooling to maintain 21C
BUT, with it's amazing divergence, this diode would make an amazing burner!




You can purchase diodes on my store page here:

JLasers - Laser Diodes

⬅ Parts

www.jlasers.org

Other tests:
Blue Diodes: Green Diodes:
NUBM0A NUGM02
NUBM0C NUGM03
NUBM0E NUGM04
NUBM0F NUGM05
NUBM0G NUGM06
NUBM05 GH05C01A9G
NUBM06 GH05C01B9G
NUBM07 NDG7575
NUBM08 NDG7475
NUBM4B
NUBM42
NUBM44
NUBM46
NUBM47
NUBM49
NDB7875
NDB7A75

 

[Gryphon]

I'm loving all these power tests!

 

[Unown (WILD)]

IKR? Good man

 

[snoopismydog]

Could you recommend a 17mm driver that would put about 6w out in a handheld with this diode?
Would a 6v 4a boost driver be to much ?
(The Ali express driver)

I've tried the 5a 3v drivers and I can only get 2.6amps 4.1 volt output (on high)
thats with a with a 6v in voltage
(It's way less with 1 18650)

 

[loreadarkshade]

4A would be fine, I know people who drive diodes way harder, 4.5A is also very common.
I can send you one of these, which was originally designed for 5A, might work for you depending on your heatsinking but no guarantees

JLasers - 17mm JLB3A

⬅ Drivers

www.jlasers.org

Otherwise I'd go for the aliexpress one

 

[farbe2]

I just want to say thank you for the huge amount of work and time you spend making these graphs.

You are the new DTR!

 

[snoopismydog]

So I got the 6v 5A (Ali) boost board,
Getting 4.6A at 4.4v
From your chart I should be Hovering around 6 watts with this setup?
Definitely a hand warmer in a c6 host