Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

589nm vs. 594nm Yellow Wavelength Comparison

Which wavelength do you own or plan to buy?

  • 589nm

    Votes: 167 62.3%
  • 594nm

    Votes: 23 8.6%
  • Both

    Votes: 41 15.3%
  • Neither

    Votes: 37 13.8%

  • Total voters
    268

Sowee7

Active member
Joined
Feb 1, 2021
Messages
439
Points
43
That's happened each time so far I've tried to get a 575nm or 577nm from Alibaba... I was hoping the 589nm would be a more available and mature product, fingers crossed!
The 575s and 577s got discontinued by lasence quite a long time ago
 





Joined
Jun 19, 2010
Messages
124
Points
28
If you want to sell your 577nm anytime my friend.... I would be honored and be first in line to buy.
 

kecked

0
Joined
Jun 18, 2012
Messages
969
Points
63
To all as I’m getting messages. I’m holding on to the modules I have as no more look to be coming.
 

skydives13

New member
Joined
Mar 5, 2020
Messages
4
Points
1
Hi, I am George, am from Greece and there are no points for sale for yellow laser pointer so I bought one from other country.
I have no idea whether it is 589 or 593.5 nm colour, how can I know? Thanks a lot!
 

kecked

0
Joined
Jun 18, 2012
Messages
969
Points
63
You need a known reference. Order some LEDs near each wavelength to compare. 594 will be more orange than 589 but both will look amber. Or get a spectrometer. Or build your own. Get a prism and measure the displacement. If you have a hene you can use that as a single calibration point.

Or enjoy it and don’t bother. If you want yellow look for tinker on eBay.com. And order a 574 from him. It looks very yellow. Tinkerco? has a longer name I forget search the forum.

It really is as simple as basic math and measuring an angle. You really don’t need software.

This one is easiest to follow. Good luck. Personally I’d not bother and just enjoy it.
 

CurtisOliver

0
LPF Site Supporter
Joined
Jun 12, 2015
Messages
7,630
Points
113
I'll have to check that with my spectrometer when I get the chance.
People have already checked and so have I. These are the classic 1064+1342nm SFG’s from years ago that have made an affordable resurgence. Ironic considering this method is actually less efficient and more unstable than the 589’s. And they were more expensive than 589’s too. These modules are still unstable at low temperatures but I haven’t ran into mode hopping like they normally suffer from.
 
Joined
Sep 20, 2013
Messages
17,687
Points
113
People have already checked and so have I. These are the classic 1064+1342nm SFG’s from years ago that have made an affordable resurgence. Ironic considering this method is actually less efficient and more unstable than the 589’s. And they were more expensive than 589’s too. These modules are still unstable at low temperatures but I haven’t ran into mode hopping like they normally suffer from.

Haven't noticed any mode hopping on mine. But, don't usually let it run more than a couple of minutes.
 

ChromeCaviar

New member
Joined
Feb 9, 2024
Messages
9
Points
3
This thread inspired me to attempt a wavelength measurement using a cheap Amazon spectroscope. I don't think I got an accurate measurement, but it was fun to try. The lasers are 488, 505 and 591 nominally. PXL_20240531_192421574~2.jpgPXL_20240531_192702730.MP~2.jpg
 




Top