Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS: Stainless Steel 18650 Kit! Polished! Perfect for 445...

They are A-140 projector diodes... They are multimode. They make a line instead of a dot, but who cares?? Because they are very powerful, and cheap for the power...

You can get them form daguin or DTR. Both have the option of pre-mounting them in AixiZ modules with lead wires soldered on.

People are pushing them to 1.8 Amps - 2 Watts with 405-G-1 glass lens if you get a high efficiency one.

But the norm, is 1.5 Amps maxed out FlexDrive with an AixiZ 445 glass lens - 1.3 Watts.

See here for lens comparisons with these 445 diodes:
http://laserpointerforums.com/f65/445nm-lens-comparisons-51456.html
 





I see alot of people on this forum appreciate your work...I want the basic kit plus hot option with current set at 1.4 watts how do I place an order?
 
Hello, I'd like to order two kits to mount DTR's 300 Red and 445 blue. Tks

Let me know what I need to do. I'd like them as complete as possible. From DTR I would need the diodes in a case with leads and g2 lens correct?

Jim
 
jme said:
Hello, I'd like to order two kits to mount DTR's 300 Red and 445 blue. Tks

Let me know what I need to do. I'd like them as complete as possible. From DTR I would need the diodes in a case with leads and g2 lens correct?

Jim
Click to expand...

Got you covered... :beer:
 
New to the forums and already spent 2 hours on here lol

i just sent you a email JayRob about a kit!
cant wait!
 
Last edited:
I'm definitely buying this. I'll send you the money this week! Thank you for all of your helpful emails and putting up with my questions. You are a great person!
 
The Stainless Steel 18650 kit arrived today! It's the perfect home for my lonely 12x diode. Shipping was unbelievably fast after the short wait for the kit to be built (backlogs = good business). It was well worth the wait.

Jayrob recommended the copper heatsink. It turned out to be a good choice. The copper heatsink and SS housing give this build an unbelieveably solid feel.

With the driver set to 390mA, this unit delivers 563mW of stable 405nm power. After two minutes, the power drops slightly to 561mW. I'd reckon the build keeps the diode cool and happy.

Another great host by Jayrob makes another enjoyable laser. I'll try to take pictures over the weekend for a more proper review.
 
Crossfire said:
The Stainless Steel 18650 kit arrived today! It's the perfect home for my lonely 12x diode. Shipping was unbelievably fast after the short wait for the kit to be built (backlogs = good business). It was well worth the wait.

Jayrob recommended the copper heatsink. It turned out to be a good choice. The copper heatsink and SS housing give this build an unbelieveably solid feel.

With the driver set to 390mA, this unit delivers 563mW of stable 405nm power. After two minutes, the power drops slightly to 561mW. I'd reckon the build keeps the diode cool and happy.

Another great host by Jayrob makes another enjoyable laser. I'll try to take pictures over the weekend for a more proper review.
Click to expand...

Glad your build went well...

Wow nice output power - high efficiency diode! :cool:
 
Last edited:
Thanks! Even the soldering job I did was uncharacteristically good. It doesn't look like I soldered it. :p

BTW - Diode from DTR, 405-G-1 lens from Jayrob.
 
Last edited:
  • Like
Reactions: ped
My origonal 445nm build is still working strong after nearly 2 years, that too was a Jayrob 18650 kit.

Cant go wrong.
 
this looks like an awesome host! i do have a question. i have a 2W 445 nm blue diode, G-2 lens, and 1.8 X-drive and a copper module, other than the heatsink host and battery (witch i would like to purchase with this), what else do i need?
 
laserdude13 said:
this looks like an awesome host! i do have a question. i have a 2W 445 nm blue diode, G-2 lens, and 1.8 X-drive and a copper module, other than the heatsink host and battery (witch i would like to purchase with this), what else do i need?
Click to expand...

With an X-Drive, you will need to use 2 X Li-Ion cells for the supply. So in this host, you can use 2 X RCR123 batteries. I would recommend these ones:
AW RCR123a Protected 750 mAh Battery

Your going to have approximately 30 minutes between charges...

For larger capacity/larger heatsink, etc... Check out my Mag kit: :cool:
http://laserpointerforums.com/f64/f...exmodp3-side-button-forward-clicky-57278.html
 
jayrob said:
With an X-Drive, you will need to use 2 X Li-Ion cells for the supply. So in this host, you can use 2 X RCR123 batteries. I would recommend these ones:
AW RCR123a Protected 750 mAh Battery

Your going to have approximately 30 minutes between charges...

For larger capacity/larger heatsink, etc... Check out my Mag kit: :cool:
http://laserpointerforums.com/f64/f...exmodp3-side-button-forward-clicky-57278.html
Click to expand...
thank you so much for the information! now where do i go to buy this host?
 
laserdude13 said:
thank you so much for the information! now where do i go to buy this host?
Click to expand...

Just send me a PM with the list of options you would like with the kit, I'll also give you links to the proper eye protection, dodes, etc... :beer:
 
Last edited:
You must log in or register to reply here.




Top