P4K VS SXD

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

Between the two drivers, which is better? I've noticed that many people use the P4K in single or 5-mode, and I saw that it has that little square with 100 written on it. I'm not sure what it's technically called, while the SXD has the same square but it says 3R3.
Could it be a valid replacement for the SXD, which has become very expensive?
The P4K also has a dual function: it has a gold spring that acts as a blank battery contact board, so you just need to know how to insert the lithium cells with the - touching the spring or the + touching the spring to close the circuit and make the ON/OFF contact. On the other hand, the SXD doesn't have all of this.

 

[Encap]

Another attention whore troll thread by destitute delusional psycho
3D aka Shadow Lasers for attention. 3D is never going to buy, own, or use either driver and has never built anything laser or laser related and is never going to. 3D lacks all the direct, skills, knowledge, and experience need to use either driver not to mention he lacks all the other parts and money to buy them needed so ...
Both driver work. There is no which is better except in 3D's psychotic delusional idiot troll world with no direct , education, knowledge, experience or skills--only his imagination. He lives in a daydream of his own design disconnected from reality.

The quote below is the real face of psychotic completely self-absorbed delusional 3D aka Shadow laser who wrote in post #31 of the "Lasers Collection" thread:
"Just for people like you, Alaskan, Unown, and those pieces of shit that were there before and that always and only made fun of me, I had set myself the goal of making you pay one day, that day has come, I made sure that LPF became what it is now.. DEAD, with no one participating anymore, I brought LPF to destruction.. and the blame for all this is only yours and your insults and false ways of doing things..
I am smarter than YOU can think, far from being sick and shit.. I am in excellent health, I made fun of YOU again because that is what you deserve ... you are pieces of shit ...

LPF IS DEAD FOREVER, AND BY MY HAND!

My job is done forever! Now I can enjoy life in your face ...
You are left with a forum torn to pieces.. ahahahahahah"

Shadow Laser is pretending he is not who and what he really is.
3D aka Shadow lasers proves again and again and again he has nothing to say or do and nobody to say or do it with.
3D aka Shadow lasers also always proves he has the mentality, emotional maturity, and impulse control of a not too bright 5 to 8 year old + the he is truly "insignificant , angry and alone" like all trolls are.
His opinions and questions are meaningless nonsense gibberish troll posts as they are just 3D playing pretend. 3D aka Shadow laser's posts are 100% meaningless nonsense troll posts, playing pretend that he is not who and what he is, and devoid of any direct real knowledge , skills or experience.

 

[zigzag123]

Between the two drivers, which is better? I've noticed that many people use the P4K in single or 5-mode, and I saw that it has that little square with 100 written on it. I'm not sure what it's technically called, while the SXD has the same square but it says 3R3.
Could it be a valid replacement for the SXD, which has become very expensive?
The P4K also has a dual function: it has a gold spring that acts as a blank battery contact board, so you just need to know how to insert the lithium cells with the - touching the spring or the + touching the spring to close the circuit and make the ON/OFF contact. On the other hand, the SXD doesn't have all of this.

What in the world are you talking about????
Stop posting stupid posts. You see no one replied...

 

[nmbusa]

Between the two drivers, which is better? I've noticed that many people use the P4K in single or 5-mode, and I saw that it has that little square with 100 written on it. I'm not sure what it's technically called, while the SXD has the same square but it says 3R3.
Could it be a valid replacement for the SXD, which has become very expensive?
The P4K also has a dual function: it has a gold spring that acts as a blank battery contact board, so you just need to know how to insert the lithium cells with the - touching the spring or the + touching the spring to close the circuit and make the ON/OFF contact. On the other hand, the SXD doesn't have all of this.

both drivers are similar in output for your project just one is cheaper because its round,on the other hand many exchange the little square with 100 on it with 3r3 and it becomes a round sxd just a little "slower" as 3r3 is just a code for Toyota 3R3 Barcelona Red not the same as ferrari red

 

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

What in the world are you talking about????
Stop posting stupid posts. You see no one replied...

No one responded? @Nbusa responded, and I thank him. I don't care about your usual comments and laughing faces.
Even though I'm not sure what Ferrari and Toyota have to do with the numbers printed on the squares, or whatever they're technically called!
But in the post about the rough rubies, no one laughed, not even you two buddies. Why? That's a smart post, then!!!!

But you two [GSS & Encap] didn't realize you offended my post, not me directly, but indirectly. You laughed at a post that discussed the differences between two laser drivers, a "cheap" one and an expensive one made with care and attention.
The P4K was also used by that member who built a 6W Mag-Lite pointer; you didn't laugh there. Burnett Unlimited also sells the P4K along with other drivers, including Astral. So Burnett sells cheap, worthless things? That's an insult to him too.
I myself [after Amak87's scam on Aceeca] wrote that the only three serious and reliable sellers are DTR, Burnett Unlimited, and Survivallaser.

I'll conclude by saying that, as a laser hobbyist, capable of building my own pointers, in your opinion, two scientists, would I spend money on a driver that costs $32? Would I spend money on a driver that costs just under a P4K? The same goes for diodes, hosts, and ON/OFF switches.
This is what I would do: I'd buy one SXD and one P4K, and I'd first reach an agreement with a factory like PCB WAY, handing over the two drivers and having them cloned exactly, in a run of 100 SXDs and 100 P4Ks. In the end, who would get screwed? Me? Or the seller?

 

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

both drivers are similar in output for your project just one is cheaper because its round,on the other hand many exchange the little square with 100 on it with 3r3 and it becomes a round sxd just a little "slower" as 3r3 is just a code for Toyota 3R3 Barcelona Red not the same as ferrari red

Thanks for your reply. But I don't understand the Ferrari and Toyota thing. Was that sarcasm or what?

 

[zigzag123]

No one responded? @Nbusa responded, and I thank him. I don't care about your usual comments and laughing faces.
Even though I'm not sure what Ferrari and Toyota have to do with the numbers printed on the squares, or whatever they're technically called!
But in the post about the rough rubies, no one laughed, not even you two buddies. Why? That's a smart post, then!!!!

But you two [GSS & Encap] didn't realize you offended my post, not me directly, but indirectly. You laughed at a post that discussed the differences between two laser drivers, a "cheap" one and an expensive one made with care and attention.
The P4K was also used by that member who built a 6W Mag-Lite pointer; you didn't laugh there. Burnett Unlimited also sells the P4K along with other drivers, including Astral. So Burnett sells cheap, worthless things? That's an insult to him too.
I myself [after Amak87's scam on Aceeca] wrote that the only three serious and reliable sellers are DTR, Burnett Unlimited, and Survivallaser.

I'll conclude by saying that, as a laser hobbyist, capable of building my own pointers, in your opinion, two scientists, would I spend money on a driver that costs $32? Would I spend money on a driver that costs just under a P4K? The same goes for diodes, hosts, and ON/OFF switches.
This is what I would do: I'd buy one SXD and one P4K, and I'd first reach an agreement with a factory like PCB WAY, handing over the two drivers and having them cloned exactly, in a run of 100 SXDs and 100 P4Ks. In the end, who would get screwed? Me? Or the seller?

150 views and 1 reply. nmbusa is toying with you with his post. Wow what a great post
You seem to have a flaming crush on member GSS that I can't even find here anymore yet you bring him up all the time.. I wish he was here to put you in your place. Seems to me you have had Italian gay orgys with many many men as you can't get him out of your mind.

Coming out of the closet would be the best for you at this point..and you would feel much better..

The P4K is basicly for a Flashlight host to where a SXD can be put anywhere, direct to the diode pins or wires from the diode to the SXD and then wires out and to the switch. You can use it if your making a custom build and put it where it fits. Saving $8 on a $250 build isn't that much.
You know this crap yet you still post "3D".
Your 3D printer pic on your laser pics was taken from a sales sight as it was brand new with no use. I don't even think you know how to turn it on..
What happened to you that you became such a miserable loser? Coming out of the closet might just help, I mean that sincerely..

 

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

150 views and 1 reply. Wow what a great post
You seem to have a flaming crush on member GSS that I can't even find here anymore yet you bring him up all the time.. I wish he was here to put you in your place. Seems to me you have had Italian gay orgys with many many men as you can't get him out of your mind.

Coming out of the closet would be the best for you at this point..and you would feel much better..

The P4K is basicly for a Flashlight host to where a SXD can be put anywhere, direct to the diode pins or wires from the diode to the SXD and then wires out and to the switch. You can use it if your making a custom build and put it where it fits. Saving $8 on a $250 build isn't that much.
You know this crap yet you still post "3D".
Your 3D printer pic on your laser pics was taken from a sales sight as it was brand new with no use. I don't even think you know how to turn it on..
What happened to you that you became such a miserable loser? Coming out of the closet might just help, I mean that sincerely..

What posts have you published? Weapons to modify and asking RedCowboy, your cell phone batteries dying, then you say you have two Motorola Motto Gs that were given to you but you don't use them, you answered a few questions to some members and that's it.
I'll also boycott from now on as soon as I see a post of yours or one of Encap's and we'll see if this annoyance ends. I don't do gay orgies, I like pussy, maybe you're into that sort of thing! If I publish a post, I DON'T expect them to respond, but above all, why do you always stick your nose in my posts? Can't you help it? There's an IGNORE button... use it and you're fine! And with that, from now on, YOU and ENCAP can write whatever you want. As far as I'm concerned, you're dead and buried.

 

[Encap]

Shadow Laser is pretending he is not who and what he really is. He is a destitute penniless psychotic attention whore troll. He proves again and again and again he has nothing to say or do and nobody to say or do it with. He also always proves he has the mentality, emotional maturity, and impulse control of a not too bright 5 to 7 year old + is "insignificant, angry, and alone" like all trolls are.
His opinions are meaningless garbage posts as they are just 3D playing pretend.
3D aka Shadow laser's posts are 100% meaningless nonsense troll posts, playing pretend, and devoid of any direct real world knowledge , skills or experience.

The bottom line re: 3D aka shadow laser is always the same . He is a delusional psychotic idiot attention whore troll.
3D aka Shadow Laser is, has always been, and always will be "nothing with nothing" and is nothing on LPF, in Italy among Italians, and on the internet in general.
3D has proven repeatedly he is an incredibly stupid completely delusional self-centered imbecile.
All he has ever done on LPF is post parasite nonsense gibberish troll posts for attention pretending he is not who and what he is. All 3D's posts have ever been is delusional uneducated Italian moron level troll posts.

The quote below is the real face of psychotic completely self-absorbed delusional 3D aka Shadow laser who wrote in post 31 of the "Lasers Collection" thread:
"Just for people like you, Alaskan, Unown, and those pieces of shit that were there before and that always and only made fun of me, I had set myself the goal of making you pay one day, that day has come, I made sure that LPF became what it is now.. DEAD, with no one participating anymore, I brought LPF to destruction.. and the blame for all this is only yours and your insults and false ways of doing things..
I am smarter than YOU can think, far from being sick and shit.. I am in excellent health, I made fun of YOU again because that is what you deserve ... you are pieces of shit ...
LPF IS DEAD FOREVER, AND BY MY HAND!
My job is done forever! Now I can enjoy life in your face ...
You are left with a forum torn to pieces.. ahahahahahah"

It is worth repeating again for good measure Ron White's observation. "You Can't Fix Stupid"/"Non puoi rimed stupid"which applies 100% to 3D aka Shadow Laser and all of his pretend playtime fake personas and psychotic level attention whore troll posts. It is worth posting the Ron White clip again as the clip applies 100% to 3D aka Shadow Laser.

 

[nmbusa]

I like pussy,

as an italian I knew you were a bunga bunga man!!

 

[nmbusa]

Thanks for your reply. But I don't understand the Ferrari and Toyota thing. Was that sarcasm or what?

sarcasm??? no no, no comparison between ferrari and toyota man in performance just as SXD>P4K not equal.spoonfeeding here give me a break

 

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

View attachment 80547

as a italian I knew you were a bunga bunga man!!

The man in the photo is Silvio Berlusconi, but he hasn't done bunga bunga for a while now. For a couple of years, he's been inside a vase-shaped cinerary urn. I don't think ashes make bunga bunga, but you don't have to be an important man to have sex with beautiful women. American women have said several times that they love Italian men. One of them said, "Oh, Italian men, so much love, the Italian men are passionate."

The American potatoes are very beautiful, very dirty, juicy, the American chop is the best. Long live the American potato.

 

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

sarcasm??? no no, no comparison between ferrari and toyota man in performance just as SXD>P4K not equal.spoonfeeding here give me a break

Okay.. thanks!

 

[SĤ𝕒∂όⓦŁ𝔸ŜєR]

150 views and 1 reply. nmbusa is toying with you with his post. Wow what a great post
You seem to have a flaming crush on member GSS that I can't even find here anymore yet you bring him up all the time.. I wish he was here to put you in your place. Seems to me you have had Italian gay orgys with many many men as you can't get him out of your mind.

Coming out of the closet would be the best for you at this point..and you would feel much better..

The P4K is basicly for a Flashlight host to where a SXD can be put anywhere, direct to the diode pins or wires from the diode to the SXD and then wires out and to the switch. You can use it if your making a custom build and put it where it fits. Saving $8 on a $250 build isn't that much.
You know this crap yet you still post "3D".
Your 3D printer pic on your laser pics was taken from a sales sight as it was brand new with no use. I don't even think you know how to turn it on..
What happened to you that you became such a miserable loser? Coming out of the closet might just help, I mean that sincerely..

You wrote: Your 3D printer pic on your laser pics was taken from a sales sight as it was brand new with no use.
I don't even think you know how to turn it on..
I open and close parenthesis, to be in line and consistent with having ignored you and Encap, but you don't have to write bullshit ..

Then I redeem the photo and I want you to tell me what to write on a white a4 sheet, to proof and demonstration that it is really my printer and not a photo taken from the web as you say ..

Let me know