Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

fs: > mxdl 180ma bluray SOLD

J

jake21

0
Joined
Dec 2, 2007
Messages
3,189
Points
0
hi guys im selling a new mxdl laser with a jayrob heatsink, powered by 3 10440 batteries included, with a rckstr driver set at 180ma and  has the famous PHR-803T, It has an Aixiz module acrylic lens-back opened. now befor i start to sell this because i no some one is going to bash me for it no name yet, but i was making a deal for a laser but didn't not no what it looked like or shape it is in, and many other things like the money i spent to make this, but this is a damn good laser, and the beam is great ect....and he probably say im a bad seller/buisness person because i backed out from  deals with him but that's his thoughts because i decided not to trade. im asking $190 now $140 for this nice br laser. i will post beam shot tonight  :P SOLD
 

Attachments

  • 531003.jpg
    531003.jpg
    5.1 KB · Views: 108





Re: fs:mxdl br laser 180ma

pic2 close up
 

Attachments

  • 4895009.jpg
    4895009.jpg
    6 KB · Views: 97
Re: fs:mxdl br laser 180ma

jake21 said:
pic2 close up
Click to expand...


Did you build this? If not, what is its history? Who set the driver to 180mA? Is it the old style Rkcstr or the new style Rkcstr? Did you sell your Laserbee or just give up on it?

Peace,
dave
 
Re: fs: > mxdl 180ma bluray

i sold it, and the driver is from rkcstr, he built it for me at that 180ma, the driver was made like 2 weeks ago. and the heatsink is from jay the host is from dx and the batteries and  the laser runs fine i tested it for a while now and performs great  
 
Re: fs: > mxdl 180ma bluray

jake21 said:
i [highlight]sold [/highlight]it, and the driver is from rkcstr he built it for me at that 180ma, the driver was made like 2 weeks ago and the heatsink is from jay the host is from dx and the batteries the laser runs fine i tested it for a while now performs great
Click to expand...

I think (hope) you meant that you [highlight]built [/highlight]it. So it's a Rckstr "fixed output" drive at 180mA. I guess I'll have to ask Ryan about whether it is "new or old" style. I'd like to continue using his driver in some of my builds, but the 12V limit is causing me some concern. I hope he built this one with the old components so that pushing over 12V (which three 10440's gives you) through it, is OK.

I have some mixed emotions about this. I'm pleased to see more people taking the chance on taking these higher. The beam at this level (and higher) is MUCH more impressive. Four months ago everyone was afraid to go over 100mA. Now they are afraid of going over 120mA. I run them (and sell them) at 180mA all the time. As long as they are heat sinked well AND the user avoids overheating the diode (duty cycle), they are fine. We'll probably burn-out a few more diodes, but IMHO, the beam is worth it.

That brings up the other end of the spectrum for me. As more people build at these levels (and begin to sell them), my market is diluted. Selling a bu-ray is tough enough right now. Oh Well . . .I didn't get into this to make money, did I ;)

Good Luck with your sale.

Peace,
dave
 
Re: fs: > mxdl 180ma bluray

thanks daguin i hope it sells to, oh and i built it :)
 
Re: fs: > mxdl 180ma bluray

jake21 said:
thanks daguin i hope it sells to, oh and i built it :)
Click to expand...


Congratulations on your "step up" :)

Peace,
dave
 
Re: fs: > mxdl 180ma bluray

Before anybody decides to buy this laser, be advised that you are dealing with a 14 year old kid, who not only backed out of a deal with me not once, but twice in less than 2 months time. Just today he lied to me & told me that the laser in the picture had NO LENS, does it look like it has NO LENS to you ? He has dragged this deal out with a myriad of excuses much like a certain other individual on this Forum, I don't need to mention names,some of us like the color BLUE, if you catch my drift. When I 1st received this laser from jake, the battery cage had only 2 batteries in it, the + battery contact inside the barrel was just floating around in there, & the battery cage itself was all messed up, & here's the corker, the damn laser didn't even work :o Since I sent it back to him, it's been one excuse after another, & even when I caught him in a bald-faced lie, he responded with his trademark, lol response, & had the gall to suggest that "was I getting pissed at him" & was I gonna write bad stuff about him on the Forum. If he was innocent of the things that I'm accusing him of, he shouldn't have to worry about what I write on the Forum, correct ? He has another laser for sale also that he marked 'sold' but jake told me that the buyer might change his mind. If he reads this he should change his mind, & buy from a REPUTABLE seller. Money for me is very tight & I only have a small amount with which to purchase laser stuff with. Jake has changed his mind & i've had to send things back & forth so many times, that I've easily spent over $10.00 in S/H costs alone.Not only that, I sent him a perfectly good 803T diode to use in the laser he was/wasn't was/wasn't was/wasn't gonna build for me. GOD only knows if I'll see that again, 'cause it's probably in the laser he's selling. Well, end of rant, I just wanted to let all out there that are thinking of doing ANY kind of business with Jake-21 should do so with a BUYER BEWARE OUTLOOK! phoenix77/rob
 
Re: fs: > mxdl 180ma bluray

heatsink/driver
 

Attachments

  • 8625009.jpg
    8625009.jpg
    5.4 KB · Views: 94
Re: fs: > mxdl 180ma bluray

heatsink/insides
 

Attachments

  • 4207015.jpg
    4207015.jpg
    7.5 KB · Views: 101
Re: fs: > mxdl 180ma bluray

phoenix77 said:
Before anybody decides to buy this laser, be advised that you are dealing with a 14 year old kid, who not only backed out of a deal with me not once, but twice in less than 2 months time.
Click to expand...

So, in your opinion, would the admonition, "Use a Middle Man" continue to be a valid warning? ;)


Peace,
dave
 
Re: fs: > mxdl 180ma bluray

there he is, haha 14 thats funny, i wouldent mind doing a trade with u only if i new what i was buying, and u mentioned loose parts the only part that came loose was the flat pcb board in side that the batterie cage rest on i dident no i had to glue that down. and u made a post about me befor i said i would do the trade saying shit about me so if u want a bluray laser so bad take ur laser and post it on he like i told u to eaither sell it or trade it :P
 
Re: fs: > mxdl 180ma bluray

daguin
would u be the middle man if some one is entrested in it ? and u can check my work out for loose parts haha
 
Re: fs: > mxdl 180ma bluray

jake21 said:
daguin
would u be the middle man if some one is entrested in it ? and u can check my work out for loose parts haha
Click to expand...


Absolutely. I have done it for others. Most of the time everything ends up just fine. All the participants pay extra is one extra shipping charge to get the laser to me. There are other members who can and will serve as middle men as well. If one of them is closer to either the seller or the buyer, it is a bit less expensive, but you are usually only talking a couple of dollars anyway.

Peace,
dave
 
Re: fs: > mxdl 180ma bluray

thanks daguin, well i live in ohio, so shipping to u shouldent be a problem
 
Re: fs: > mxdl 180ma bluray

FYI: Jake is a trustworthy guy and makes some awesome lasers. he builds like 3 a week and is getting crazy good at making them. craftsmanship comes with experience and Jake has tons of it.

also he isn't 14.. he's my age :)

$190 shipped is a great deal on this IMHO, the parts alone are worth a lot and the time it takes to build one of these is worth even more.. not to mention the expertise required.

also, if you really need a middle man, I wouldn't mind doing it at no charge... I'm located in Texas.. and have a LPM-1 meter (which is a decent meter; good for getting an idea of what the actual power is).

good luck on the sale Jake.

take it easy guys,
Kendall
 
You must log in or register to reply here.


Back
Top