Ok so i bought a 150mw Green laser from dinodirect. The problem is i only used it for about an hour, and the battery spring feel out. Im pretty sure it was soldered on does anyone know how i would fix this and how would i take the laser apart to fix this? if you guys need any pics let me know. heres the link to the laser i purchased 150mW 532nm Flashlight Style Green Laser Pointer - DinoDirect.com
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
How to Register on LPF | Buy Site Supporter Role (remove some ads) | LPF Donations
Dinodirect flashlight style laser problems
- Thread starter weecho
- Start date
ARG
0
- Joined
- Feb 27, 2011
- Messages
- 6,772
- Points
- 113
Pictures would help 
weeba2kv
0
- Joined
- Sep 24, 2010
- Messages
- 1,364
- Points
- 0
Drill 2 holes in the circuitboard ( left and to the richt of the contact) and turn the spring into the circuitboard so that the battery doen't put force on the lead contact but on the circuitboard.
I tried to make a pic so you can see what i mean.
Good luck
I tried to make a pic so you can see what i mean.
Good luck