Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

Adjustable Mirror mounts for diode combining or Dichros

MISTERWILLING

MISTERWILLING

0
Joined
Apr 2, 2009
Messages
356
Points
18
This a repost from a thread on PL:

If anyone would like some adjustable mirror mounts for cheap I am will to give everyone a bulk discount. I would need a total of 50 parts to start the order. A bigger discount would be given to everyone at 100 parts and 200 parts as well. I would like to keep it a 2 part min. order per customer.

I all ready made Andy about 45 and here is his thread with my review and some pics: http://www.photonlexicon.com/forums/showthread.php/10615-Excellent-service-from-misterwilling
(the mounts I'm offering WILL be tapped unlike the ones I made for Andy)

Here is a few more pics of them installed
http://www.photonlexicon.com/forums/showthread.php/10239-Another-project-red?p=139887#post139887
http://www.photonlexicon.com/forums/showthread.php/10239-Another-project-red?p=139723#post139723

They use m2x.4 screws and set screws for adjustment.

Pricing for raw mounts would be (depending on the quantity I get):
50-100 parts - $12 per set (includes the angle part and the square part)
100-200 parts - $10 per set
200+ parts - $8 per set

Add-ons :
$1 per set - set of 3 screws and 2 set screws ( what you need to mount the angle to the square part )
$.5 per part - yellow chem film coating ( here is an example: Chemical Film Coating, Chem-film Coating - Georgia Metal Finishing )

PM me and I will keep a list going to see if there is enough interest!


List:
LPF:
danq 2 - all options $27
hakzaw1 2 - all options $27
Flaminpyro 2 - all options $27
ElektroFreak 2 - all options $27
COLDSTL 2 - all options $27
PL:
no-esc 4 - set screws $52
badger1666 10- ???
jaycey 3 - set screws $39

Thanks,
Austin
 
Last edited:





Nice mounts. :san:

Links fixed \/
MISTERWILLING said:
I all ready made Andy about 45 and here is his thread with my review and some pics: http://www.photonlexicon.com/forums/showthread.php/10615-Excellent-service-from-misterwilling
(the mounts I'm offering WILL be tapped unlike the ones I made for Andy)

Here is a few more pics of them installed
http://www.photonlexicon.com/forums/showthread.php/10239-Another-project-red?p=139887#post139887
http://www.photonlexicon.com/forums/showthread.php/10239-Another-project-red?p=139723#post139723
Click to expand...
The PL thread is here Group Buy for adjustable mirror mounts!
 
Last edited:
ya know I don't know about anyone else, but this seems to me to be a perfect thing. I really really REALLY need some now tho!
 
The seem very useful.. however, how would you use them as a dicro mount? Should there be an aperture in the part thats bolted down, and also so mechanism to fit the dicro in the adjustable part for that?
 
Benm said:
The seem very useful.. however, how would you use them as a dicro mount? Should there be an aperture in the part thats bolted down, and also so mechanism to fit the dicro in the adjustable part for that?
Click to expand...

Glue the dichro overlapping the edge of the mount, if you know what I mean?
 
K you guys are down, I will start a official list tonight. I am not very close to 50 yet but I have three sent out for trials for people that may order once they get the test part.
I expect to run the batch in the next two weeks at the lastest. Payment will be taken just before they ship.

They can be used as dichro mounts by having the dichro go above or right next to the mount.
 
These can very easly be used to hold your gobo or defraction grating all though a bit more expensive of a holder than is needed to hold something that dose not need to be adjusted, a simlpe piece of aluminum angle is all that is required but if you want it all to look the same on the inside you will want one of these to hold your De'Frac'gr.
all you need to do is cut out a piece of grating big enough to cover a small frame made from just about any thing an old plastic coated playing card is stout enough cut out the frame whatever shape you chose and glue your grating film to it and the glue it to any edge of the "MOUNT" you may want to leave a tab on the edge of your frame so as to glue that to the mount.
heres a little defraction grating GOBO I just made up to show you ;)
I had the little thin brass ring laying around so all I had to do was cut a piece of de'frac' film to fit and glued it on.
snm15t.jpg

Maby if you asked realy nice Misterwilling will make you and other people some holders from the same material he makes the adj. mirror holders from so they would look the same but not have the hardware on them they don't need ;)




Benm said:
The seem very useful.. however, how would you use them as a dicro mount? Should there be an aperture in the part thats bolted down, and also so mechanism to fit the dicro in the adjustable part for that?
Click to expand...
 
Last edited:
NICE!!!!! Put me down for two sets with all the options. ........+ rep too. --thnx HZ
 
You must log in or register to reply here.


Back
Top