Search results

They're rated 2AH and the module draws about 1AH. Probably higher draw than what they're designed for but will start with this and go from there.

Here's the mod'ed Ryobi battery. Long dead so no loss. Also, 11 years old, so I don't think the charger circuit was worth trying to replace the LiPo cells. Using 6 AA NiMH batteries fully charged is 8.4V, drops to around 7V when depleted. So far has powered the 7W 450nm module well. I just...

I think what I'm going to do is buy some copper pipe, cut it into sections about 2" in length, then slit lengthwise. Bend each successive section into a sleeve to fit around the next. As long as there is some pressure through friction, there should be thermal transfer. I could solder it all...

Looking for a 50-60mm heatsink "sleeve" for a 25mm module. Aluminum, so not too heavy. Finned or not finned. Gutted this old Ryobi flashlight and a dead battery pack. Looked at building into it a 7.4v LiPo battery pack, but going to go cheap at first and try a 6AA holder with NiMH cells (8.4v...

If someone's done this, please let me know. Rather than a bunch of hosts, I'm intending to build a single large host that will serve as a test platform. The idea is to put a single large disc (e.g. 4-5" diam., 1-2" deep) of aluminum up front, and sink into that several cavities for 12mm...

Thanks much! Will be interesting to see how that old potted power supply powers up after 20 years in storage. May stand back several feet.

I found this ref to the power supply. Looks like black is common for the input ground and laser cathode. Thanks for the info on the Siemens tube. I found some photos that confirm this.

Look what I found in my goodies bin. Made in West Germany - so that tells you the age. I think I picked these up in the early 90s. I recall they worked but I’ve misplaced the instructions on the power supply. If you’ve seen one of these let me know the color codes. I believe it is black -, red...

Great story. I have to find the .5mw HeNe unit I built ca. 1985. Got the tube at a ham radio "hamfest" and forgot where I found the power supply - probably from the back of Radio-Electronics magazine. I seem to recall I spent around $50 for each, which was around 5-10 lawn mowings back then...

Here are some cheap ($4) batteries with USB chargers built in! Clearance: http://www.shop.goodprophets.com/product.sc;jsessionid=4B3531E6ACB85A20780388FC5BFE2037.m1plqscsfapp03?productId=336&categoryId=1

Now these are cool! Expensive however... $50-$70. Variable voltage and current. One of these and you could construct endless laser heads... VapeOnly vPower VV 14500 Mod KIT another: Vamo VV Mod V2 and another: Vmax VV Mod

Here is the circuit that is commonly in these devices: eGo-T Circuit Board I've several of these boards. The claims are 2.2A max current. What's nice is you can leave the battery in place and charge from the output connections. Given that I paid about $2 for the boards, I won't mind...

I knew someone else must have had the same idea! What's cool about these batteries / accessories is there are many mods out there with threaded adapters of various sizes. I use one that takes a standard 18650 cell and provides threading for the standard "Ego-T" atomizer. I've a couple of...

This was the ebay retailer from whom I purchased them - and the same item up for auction: [USA] New 32650 Rechargeable 3.7V 5500mAh Li-Ion Batteries battery lithium-ion | eBay I cannot vouch for their rating or longevity. They appear good and take a charge well. I have not used them for more...

Even more useful, perhaps, is a current monitor. These are basically the same thing, measuring (I assume) voltage across a known resistance (the shunt). I don't know if they are modifiable for, say, 1 amp, but I guess you could divide by 10. :-) 0.36" DC Digital Ammeter 10A Red LED Panel Amp...

Yes - good point. There are, however, versions which have a third wire and will measure 0-100V. They are not much if any more expensive. The cheapest seem to hover around $4-$5. Now, if I could just find a curved display that would flush-mount with the host. I plan to put them in the...

This one is doggone cheap, but intended for NiCd or NiMH 4 and 5 cell packs: RC Model 7 LED Battery Voltage Indicator Monitor Car | eBay That said, it has a switch for 4.8 or 6v operation. Think I'll get one and see if I can mod it for 7.4 and/or 3.7v.

Two 16340s fit side by side. Easy way to stick to cheap standard size and get 7.4v. Now, have to figure out how to get them in a holder that doesn't add to the width. They are snug. I don't see any with tabs. Another possibility is a bunch of 10440s without protection circuit. Might still...

Though something of a pain to recharge, it may work best to get a bunch of these sorts of cells, putting them into 2 sets of parallel arrangements, put into series together for 7.4v. Create 2 custom cells, in effect. Could probably wrap each to fit half the compartment. I wonder if charging...

The gearshift handle that is my avatar is being made into a host. There's a hidden compartment which will perfectly hold 2/3 of a D cell. There exists a 1/2 D cell - awesome! But only in NiMH, so I have found. 1/2D Size Rechargeable Battery 2400mAh NiCd High Top | eBay A few thoughts on...