Search results

Please refer to post #8 for host details. LPM SOLD!!!

Hey guys, here is a quick tear down of the 6 x XM-L2 SRK clone I received from DX a few weeks ago. It's an overall great light and is easily moddable to get increased output. From what I noticed all the PCBs have no finish, its all copper. No HASL or ENIG. The light comes with lubricated...

This laser comes with one 18650 battery and case as shown in the picture. The heat sink was made by the one and only Ehgemus! It's a screw on type heat sink that goes onto the pill. I believe these heat sinks are a little bit better than the regular style since it makes a better contact with the...

Hey guys, I'm trying to clear out some of my stuff to make room for future projects. I am also contributing $1 to LPF for every driver sold until I am sold out. I know it's not a lot, but it still helps. :yh: Linear drivers LM1084 based linear driver: $8 shipped CONUS! (INTL available at...

Please don't forget to read the disclaimer at the end of this post!! Hey guys it's been awhile! I'm cleaning up and just need to sell some stuff that I don't really need anymore. First up! My 2nd laser build featured here [link] The tail cap threads are a bit damaged so I put Teflon tape to...

Hey guys, I just recently finished building this baby. I think it was the most time consuming build I've made and most expensive due to diode, polishing, etc. However, it was the most fun!!! I received this host 2nd hand from another member on BLF for a pretty good price a few months ago. It...

Hey guys, I have a guidesman host for sale and it's polished. :D This host can fit a nice huge heat sink as I've done in a few of my builds: http://laserpointerforums.com/f38/gray-guidesman-405nm-bdr-s06j-827-mw-pic-heavy-74305.html...

So here's a build I was working on and finished last week. This is actually a twin to my red Guidesman build that I had Jay machine heat sinks and focus adapters for. It' has a massive heat sink that keeps this laser pretty cool. It barely gets warm after a few minutes of on and off testing...

I got tired of my 2 bay charger, tired of charging 1 battery at a time on my hobby charger, and didn't want to buy another separate charger for my many different batteries. So I thought, why not mod my old NiMH charger to charge more batteries on my hobby charger? I can now charge any size...

DRY 3 x XM-L T6 CW So, I got my hands on one of the best 3 x XM-Ls lights to date. I ordered this on 2/19 and received it 2/29. Ordered through Ric and thew in some extras which was very nice of him! This is the updated 2nd version, not to be confused for the earlier model. Some users have...

I been planning this build for quite a while now, but never got around to actually building it til now. I got the idea for a triple XM-L from threads over at CPF and decided it would be a cool build to make. I originally planned on using a sandwiched AMC7135 driver to reach 3A and just...

Hey guys, here are 3 XM-L T6 bin emitters mounted on a 18mm (copper) PCB. I originally bought these from DX to build a triple XM-L light, but I'm going to be using U2 bins instead. Here's some pictures: The price will be $9 USD each or $26 USD for all three. Shipping will be done...

Here's another DX light :yh:: fandyfire-stl-v2-cree-xm-lt6-5-mode-1000-lumen-white-3-led-flashlight-black-2-x-18650 - 5 modes: high, medium, low, slow strobe, SOS - Claims 3000 Lumens (over-rated) - 1000mA output per LED - Smooth (SMO) reflector - Mode memory I got this light through DX's USA...

I have 3 bundles of 10 feet of this wire. Specs: Silver plated Oxygen free copper wire Teflon insulated (high heat resistant) 19 Strand 20 AWG Mil Spec - M22759/11-20 O.D. 1.46mm I bought this wire to use in my SST-90 build, but I have more than enough to use in future builds. This...

I had a lot of time to think about this build since some of the parts have been laying around my room since summer, heh. Here's a few shortened specs since I know paragraphs can be a bit of a stretch for some people :p - CREE XM-L 6500k - 7000k U2 bin from DX *link* - 3D LED Maglite (Black...

I been eying the Mitsubishi 635nm diode and I have finally completed my first red, and it's pretty satisfying! I had Jayrob machine me a custom heat sink for the guidesman and he did an awesome job! I purchased the host on ebay and the diode from DTR. I ran into one issue with the driver that...

It's been 5 months since my transaction with Ray and I have been patiently waiting for my refund. He recently announced that he was giving out refunds based on chronological order after a thread rhd made about him, but no refund yet. I paid for 2 guidesman hosts back in June along with a...

Sipik HK21 445nm @1.56A host/heat sink by qumefox This host has been sitting at my desk for a few months until just recently I had some time to do a build :yh: I orginally intended to use this host for the BDR-S06J diode, but since I had an extra 445 (thanks rhd) I thought might as well...

Another light from DX: SpiderFire SSC P7-C 2-Mode 900-Lumen SpiderFire SSC P7 SSC P7-C 2-Mode 900-Lumen LED Flashlight with Strap (1*18650) - Free Shipping - DealExtreme - 2 modes: High, low - digitally regulated or direct drive? - manufacturer rated at 900 Lumens - Orange Peel (OP)...

Hi guys, I had this heatsink custom made for a Trustfire TR-801 light by Ray J Neal. There's nothing wrong with it, but it was a bit too long for my tastes so I had Ray design another one and paid for both. The reason I'm selling this is that I don't really have much use for it and don't have...