Search results

Yes, please order from Survival Laser USA Home, we are restricted by the FDA on selling combinations of some parts in the U.S.

If you're talking about the adapter, yes, we plan to sell it as a separate accessory.

Thanks...note that I edited the post to mention that that this part will only work with the copper module with the driver shelf, the other versions are a different length.

I think that even a 5mW green unit would be suitable for that purpose, depending on the distance.

Here are some photos of the Survival Laser prototype 20mm diode module adapter assembled with a DTR 20mm diode module and our S4 host. It will also fit a C6. The inside lip of the adapter makes direct contact with the module and holds it in compression against the driver pill. By using a small...

Here are some photos of the prototype 20mm diode module adapter assembled with a DTR 20mm diode module and an S4 host. The inside lip of the adapter makes direct contact with the module and holds it in compression against the driver pill. By using a small amount of thermal grease, effective...

I would have to take measurements and design it, unless someone has one handy and they could send one to me. But yes, I would be interested in selling them. I was planning to integrate a recess for a driver board brass ring in the bottom. The extended focus rings are made in small quantities...

I'm sure a high power laser will burn a hole through any plastic lens in a relatively short time, no matter how high the quality or OD rating. Remember that most goggles are for momentary protection only, not continuous direct exposure.

Yes, I would appreciate hearing what the issue is.

Here you go: Standard Focusing Ring It's also on the "accessories" page of the international store.

We can do that! :beer:

Here are a couple of photos of the first prototype of the DTR 20mm diode module adapter for the C6 and S4 hosts. I decided to combine 2 parts into one, which is simpler and less expensive with the same utility. I'll show it assembled with the other components as soon as we receive the...

Unfortunately since the bezel or a combined part holds the module in place and prevents it from rotating you will still need a separate focus adapter. But combining the two parts (bezel and module holder) reduces the complexity and cost.

Here's another drawing showing the entire layout: Working on the individual part drawings and dimensioning now. Actually, with this design, is it necessary to make the bezel and module holder separate parts or could they be combined into one?

Many of you are aware that DTR has been selling 20mm diode modules: http://laserpointerforums.com/f64/20mm-copper-modules-9mm-5-6mm-3-8mm-diodes-99430.html I'm working on developing some host components to fit the modules and should finish the design soon. In particular, the first parts will...

Thanks...can you give me an idea of the types of projector parts that would be of interest?

That's a great idea and I think we will list all the hosts in a simpler manner with all the available options. In the meantime, here is the pill with the driver shelf by itself: Driver Heat Sink Pill & Brass Ring

Thank you! We're out of town today and tomorrow so it should ship Thursday.

That problem seems to come and go. I'll file a ticket with their customer support. Thanks!

Thanks, Jeff!