Search results

check this for starters for resistors,ohms law etc as I did. 3w.facstaff.bucknell.edu/mastascu/elessonshtml/EEIndex.html Bionic-Badger loved the link to google

so thats where they're made??I got ripped off by a person on e-bay with one of them lasers advertised as in your link. his pics were of the dx 200 green and i received the same AG-2008 style, same keys,same shutter and all no strap as in photo.build is great but not anywhere near 200mw rated on...

actually its C6 DIY Cree I got from dx along with a Cree XR-E i'm running the 6x at 250ma.basically have a couple of 6x sleds recently aquired and since not running long duty cycles thought I'd push it a bit.have a PHR at 200ma for the last month and is being going strong,every night my daughter...

ordered a pack of the 350ma from dx so I can also mod them adding chips so had to try them out. one great thing about the maglite is its got great anodizing dont need to isolate heatsink so no shorting as amc7135 is a negative regulator and as red is case negative. measured continuity a couple...

hi there just finished the day with another blu,made my rkcstr driver and dialed at 300ma anyone know the output in mw as I dont have laser meter yet.

I made an easy project PHR violet based on amc7135 350ma for a friend real cheap. since host powers by 3 AAA alkalines dropped output to about 200 ma with an smd 8.2ohms resistor in series as alkalines tens to sag really quick.

Hi there. since I just startered with lasers and very fascinated,after doing my homework on the site so to not ask questions and all, since the search button has all answers thought I show my latests projects. what do ya think of my stash?

I made this little pocket rocket based on a amc7135 350ma. added a second chip and a 1ohm resistor in series and is at around 460-480 ma from what I remember.LG22x loc.

Hi there. just finished my maglite with a amc7135 350ma  driver.

hi there first post so here goes. did my homework for a while reading, using the search as many require to many questions and went ahead and made some lasers.even though I did start from the maglite whch is still alive after 2 months.this laser stuff is really great,especially due to this...