Recent content by Slayersav

Can't i just use 1 of your high powered lasers that you build? It is after all Lazer Tag and the object of the game is to go around shooting the ENEMY players :-) Thank you for your help, when im able im going to order those pointers and hopefully send them to someone who wont rip me off. I...

Alright so they definitely need to be tested then. Thank you ! Cant the lasers be adjusted with a little dial on them? how much are those LPM things.. probably be easier to just do what you said. Ill give this a shot :-) You have helped a lot Thank You !

I was probably only going to get a couple to see if I can get it to work. With the filter though it should be relatively safe? 1 second exposure max and most of the time there is no contact on people but the vest itself. But safety first so whats "LPM"? and you recommend i have these tuned...

Awesome.. This will be safe though correct... with the lens?

I had to wait on ordering the laser but I have the resistors and everything that i need to build what you showed me. Another thing is.. I gave that dumb idea of connecting a laser pen with a 7805 regulator and it works. The gun is shooting the laser and everything seems to be fine as of right...

Alright so then Just the Laser, 1 10ohm or 5ohm resistor? and the regulator. Correct?

Alright then I Just go with LM317, Laser Diode, and 2x Resistors. Ordering the Laser today and going to the local electronics shop to get parts. I will take pictures and let you know if it works ! hopefully i do this right !

See im learning.. You are right, I thought that whole piece was the diode/driver. It does have a lens and a housing around it. I posted a picture of it already. Its that little bronze 3pin thing that i connected to an existing driver. I will order that piece that you suggested and TRY and...

Its a red diode that I bought from the local electronics shop. The only thing it came with was that wrinkled schematic (posted picture in earlier post) that I was not supposed to take. The only person who was there at the time was unable to tell me specs on the particular diode. There was just...

Alright this is the first response that I have seen or maybe I overlooked it that says this makes no sense. That is awesome because now i will stop trying. This is just what was in the instructions so I was trying to make it work. When the trigger is fired its Firing off 9.6v so its burning...

I cannot send the gun anywhere. This is for a place I work and the equipment is expensive. Never mind trying to get the green lasers firing I just want to know how to Hook up a standard RED LASER DIODE to a 7805. Don't worry about what the voltages are, what the current is. I have given all...

If anyone could help me out that would be awesome..

Is this what the schematic is showing me? Would this work or does it even make sense? I don't know how to read schematics :-(

Alright Its been a while since I have posted and that's because I have been trying to get some information. Here is what I have found out so far, again all your help is appreciated. Most of the equipment has these laser's in them. Model #: JAT-LM 635 Visible Red Laser Wavelength: 635nm +/-...

I cant seem to make my own red laser. I got a red laser pen and a regulator ( maybe ill try a different one ) The input pin on the regulator is +ve (red wire to PCB) The Ground pin on the regulator is soldered to the spring of the laser driver. There is another wire soldered from the ground pin...