Recent content by runcyclexcski

Do they normally fix these by tacking with UV-curable epoxy? I prefer reversible mounting, but I am not up to making a retaining ring for the mount. Yeah, it appears I need to get a 3x9 mm Al or steel tube (or smth close, like 3/8 by 1/8), a 9x0.5 die, and get to work. In hope that a standard...

Hi all -- Has anyone encountered this lens diameter before? I extracted it from a Blue Ray module, it's supposed to be a 405nm aplanatic asphere (according to patents). The diameter appears to be about 3.7 mm (that was the ID of the plastic tube that held it, measured with calipers). I now need...

I see that it might be easier to probe higher power lasers (more heat?). My application deals with lower powers (up to 200 mW), and is more about the stability and resolution (1-3%). I believe, all things equal, higher accuracy and sensitivity would be better to have than being able to deal...

Many thanks, Adam! Exactly the type of unique DIY insight I love this forum for :) May I ask if you found any thermal issues with the unit? I suppose, they placed the sensor far away from the battery, so, probably, it's not too bad of an issue. If I had to build something similar, I would...

The target is a microscope slide, with fluorescent molecules on it; the laser makes them glow; I image them with a camera. 730 nm is a somewhat exotic line. The power of available good-quality laser sources (e.g. Coherent) is limited at 30 mW at TEM00, and I get about 20 mW out of the fiber...

Many thanks! This looks exactly like the box I saw on ebay :) I even started thinking to get a used body of a mirror-less camera; but realized that they may not even power up w/o the lens attached.

This is what I was hoping for (that someone has bought this unit and could give feedback). I am now leaning towards getting a basic monochrome USB CMOS cam from Edmund (e.g. their 14-857, abt $300), put in NDF, and profile the beam that way. Quantum yield of the sensor is cited at 30% at 730 nm...

Yes -- Thorlabs EE02 coating. Previous ones were protected silver (1/2 the price) I suppose I could rig a 1/2" CCD or CMOS sensor together (have a few lying around) and integrate the pixels to get relative measurements upstream/downstream of the mirrors. I could put in an NDF to avoid...

I need to measure the power of a 730 nm TEM00 laser beam that reaches a target after bouncing off 10 consecutive mirrors. Previously the mirrors had a rating of 90% reflectivity; I have replaced them with ones that have a rating of 99%. I want to verify this, and, if not the case, identify...

I have a team-shared Coherent Field Mate PM10 (which is great, but is not always available), and a personal LaserBee recommended here . The latter was $200 and worked for 488, 532 and 633 at 200 mW, but could not probe a 730nm beam at 16 mW. The 730 nm beam is what I am after now. The...

Well, why not pay $10 000 for pair of safety glasses then? :) Surely, one's eyesight must be worth that much.

I agree regarding high power lasers; the 532 unit I was referring to was 50 mW. I would be curious to do side-by-side comparisons with the Eagle glasses, in terms of power damage,, and also to find out the details of the manufacturing process for coloured acrylic sold by stage filter companies...

Hi all, the following is, obviously, a do-at-your-own-risk idea, but for DIYers like myself who are not willing to pay $100 for certified laser safety glasses, I found that one can find interesting options on the Lee Filters web site, and cut the film to shape of regular wrap-around clear...

I believe I have checked the Ophir sensors before (when looking for a professional grade one), and they appeared within the same price range as the Cohernet ones. Since I already know my local Coherent reps, it was easier at the time to get everything from Coherent and get a discount on a bulk...

Thanks! I just ordered their basic unit that has the 10-14s 90% response time, it should be sufficient to get me started. I wish I could go for the 3-4 sec response time one, but was not ready to spend $330 yet (plus shipping -- I am in the UK).