Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Recent content by Pershing228??

  1. Pershing228??

    NUBM0G laser build

    Yes, it looks pretty similar, but I used the Convoy driver (3A 6V) with one of my previous builds (NUBM07), and my diode died after a month of rare use. To be honest, I do not know why, because the current was safe, and the heatsink was also good. So now I don't use the Convoy drivers in my...
  2. Pershing228??

    NUBM0G laser build

    I would like to provide it, but I bought it on Aliexpress, at the OpticsLD Store, and now this product is no longer available.
  3. Pershing228??

    NUBM0G laser build

    The divergence is about the same as on NUBM0F/44
  4. Pershing228??

    488nm cyan laser build

    On this build I used a pretty common cyan laser diode, the Sharp GH04850B2G. This diode is single mode, and emits light with 487-493nm wavelength. In my build, it works with a 400mA driver with 2x 18350 batteries. Since this diode is single mode, I choose the G2 single element glass lens to...
  5. Pershing228??

    NUBM0G laser build

    Hello everyone, and here is my another laser build. In this project, I used a Nichia NUBM0G laser diode with a wavelength of ~470 nm. It works with a 5A boost driver, with single 21700 battery, so the output power should be about 7+ watts. The wavelength of this laser is one of my favorites, 470...
  6. Pershing228??

    NUBM0F

    Hello everyone, how big is the divergence of this diode with G2 compared to nubm08/0E?
  7. Pershing228??

    USHIO HL63643DG 638nm laser build

    Hello, today I want to tell you about my 638nm laser build. The diode I used is USHIO HL63643DG. Host-Convoy S3. For this build I used a 350mA driver (1x AMC7135). The output power should be around 300mW. Optics-G2 single element glass lens. The divergence of this laser is very cool, because...
  8. Pershing228??

    Sharp GH04W10A2GC 1w laser build.

    I also think to put the driver on 1A, but it's a little scary for the lifetime of the diode
  9. Pershing228??

    Sharp GH04W10A2GC 1w laser build.

    Hello. Today I decided to make a small review of my Sharp 405nm GH04W10A2GC build. I use 750mA driver for this build. Output power should be about 1W. This device is powered by 2 16340/18350 batteries. Divergence from this multimode diode is pretty good, much better than my other multimode...
  10. Pershing228??

    NUGM04 525nm laser build

    Hello everyone from Russia, this is my brightest green laser pointer. I used Nichia NUGM04 525nm laser diode at 2.3 amps. Output power of this thing is around ~1.6-1.8w of green spectrum. The brightness of this beast similar to my NUBM07E 470nm 5w build. The divergence is sucks with standard...


Back
Top