I had an Idea to make a laser differently. So, I was happy to purchase a Silver mag-light From Jayrob (The Man!) . Very Large air cooled / finned aluminum heat-sink.
Video in (Operation) https://youtu.be/U1HLLiozblE
What I did different was to put a 80MHz ARM processor, dual Color OLED...
:wave:I had an Idea to make a laser differently. So, I was happy to purchase a Silver maglight From Jayrob. Very Large air cooled / finned aluminum heatsink. As nobody has purchased it I had a chance to erradicate bugs and got the output to 7.1W.. Interested? Make me an offer, cash/partial...
FS: C-88 Host with Large AL heatsink, lever focus, Copper Module with Great Diode (Lowest Current, highest Out I've seen), 520nm, 1.75 Max (peak), 1.62W settled after 1 min. Thermally Potted with epoxy to LD & Proprietary driver. You will want to purchase protective goggles for use during...
Gravity controlled 6.35W 450nm MagLight Host $650
I had an Idea to make a laser differently. So, I was happy to purchase a Silver maglight From Jayrob. Very Large air cooled / finned aluminum heatsink.
What I did different was to put a 80MHz ARM processor, dual Color OLED & Multiple sensors...
I have for sale another neat, well made Large Area Heatsink & host from Flaminpyro (Jeff) C-88 with my boost drive. Unit runs on 1 - 32600 Battery (comes with 2) and 4 gang 18650 charger. Unit has such a large heat-sink it will run for 3+ minutes. It will get slightly warm, let it cool for a few...
focus and momentary (not locking) end switch., Boost Drive, 9mm Diode & Copper Heatsink, AR single lens (Thorlabs Not G series) , Custom Focus Adapter. Hydra (Flaminpyro)
This laser operates fine at this power level. Tested as usual on Ophir Power Meter(S)
Comes with: 1 - Panasonic High...
OK, Thanks
SOLD THE SH-032
Lastly, For Sale, my Ultrafire MCU-88 3.4 Watt 445nm with Monster Heatsink, Boost Drive, 9mm Diode, AR single lens, Custom Focus Adapter. Focus Adapter & Heatsink for host have been GUN BLUED. Anti-reflection inside with gun blue on lens holder as well.
Comes with...
FS: GREEN 520nm 1.38W SS SH-032 18650 Hand Held with Hydra
Aurora SH-032 1.3W 520nm Green Pointer with Hydra focus and momentary (not locking) end switch., Boost Drive, 9mm Diode & Copper Heatsink, AR single lens (Thorlabs Not G series) , Custom Focus Adapter. Hydra (Flaminpyro)
This laser...
For sale - Aurora SH032 single 18650 battery 450nm, 2.8W (Max 2.9W) handheld -
Same beautiful stainless steel polished host, fully thermal potted laser and driver. Run time ~1M on and 1-2M off depending on ambient temperature. Focus adapter is 2mm wider than handheld.
Selling with 2 - 18650...
For sale 3.3W 450nm / 9mm - SH-032 Stainless steel Build Duty cycle 30-40 sec on / cool down 1 min or so depending on ambient temperature. - Set $399 PP US (lower 48)
Wonderful, well known single 18650 hand held plus
Includes:
SS Sh032 laser with Aluminum heatsink & COPPER diode...
Users Et Al:
If you have any P3 drivers that do not work or do work, let me know hat you have.
Very much in need, If you can help, let me know ASAP.
Mitch
For sale 2.75W 445nm / 9mm - SH-032 Stainless steel Build with custom focus adapter. Duty cycle 30-40 sec on / cool down 1 min or so depending on ambient temperature.
Wonderful, well known single 18650 hand held plus
Includes:
SS Sh032 laser with COPPER heatsink & COPPER diode heatsink...
For Sale - 445-450nm Blue, 2.5 Watt (2.4W after 1 min) Kit: $330 Shipped Conus
SH-032 Stainless Steel Polished Host
2 - NEW High Output 4000mAh 18650 Batteries
1 - Dual AC Charger
1 - NEW set Safety Goggle/Case.
This Handheld is made from all copper heatsink and diode holder...
I have for sale a new, SH-032 445-450nm, 2.75W Handheld build. New 9mm diode, copper heatsink, Single Element AR coated Lens. Runs for 2min+ on / 1 min off with fully charged 18650 4Ah battery (included) New 2 cell recharger. Unit is completely potted with thermally conductive epoxy for great...
I have one more SH-032, 2.6W, 445-450nm full 2-part epoxy filled pill & Diode Housing. Boost drive runs for 1.5 min with cool off for 1 min. Kit includes 1 - 18650 (new) high capacity battery and AC (USA) charger. $300 shipped Lower 48, International PM me. PM if interested, this i a quality...
FOR SALE - Cree SH-032 Jayrob Host 2.6W 445nm Handheld w/ 2 NEW High Capacity (no current limit circuit) Li Ion 18650 Batteries & single battery AC Charger.. Starts at 2.7 W and at warm up stays around 2.6W . Uses boost drive , Original 9mm Diode Lens, 9mm 445nm diode, copper heatsink...
I am looking for a quantity of Flex Mod P3's for ongoing projects until I get my new boards assembled. Anyone with some to spare, please PM with price and quantity.. mitch@visiblediodelasers.com
Just in case - photo (I'm not inferring you don't know what it looks like)
I can build more of these - Let me know 2.6W / 445nm HH 18650 for sale - More internal epoxy behind laser diode tube.. I have a Cree SH-032 2.6W 445nm Handheld w/ 18650 & single battery AC Charger.. Starts at 2.6 W and at warm up stays around 2.58W. Uses boost drive , 9mm diode, copper...
I have a Cree SH-032 2.6W 445nm Handheld w/ 18650 & single battery AC Charger & a pair of laser protective goggles. Starts at 2.75W and at warm up stays around 2.6W. Uses boost drive , 9mm diode, copper heatsink, driver potted up in pill with arctic alumina 2 part thermal epoxy. Lens is DTR...
I am looking for 2-3 V4/V5 Micro flex drives for my hosts. I know not many more are available and I'm willing to pay a premium for them. Please PM me with price. Thanks in advance..